A simple and effective method was developed using phenol formaldehyde (PF) resins to immobilize hydrous ferric oxide (HFO) onto granular activated carbon (GAC). The resulting sorbent possesses advantages for both the ferric oxide and the GAC, such as a great As-affinity of ferric oxide, large surface area of GAC, and enhanced physical strength. The studies showed that within one hour this sorbe...

Isotherms were developed at pH 6.9 for adsorption (ADS) and coprecipitation (CPT) of Cu by hydrous oxides of Fe (HFO) and Al (HAO) to study the role of sorbate/sorbent ratio in metal cation removal. For low sorbate/sorbent conditions, HFO had a higher Cu retention capacity than HAO regardless of contact methodology. For either oxide, CPT was consistently more effective than ADS in removing Cu f...

The adsorption properties of various sorbent materials were investigated to assess the factors affecting biases in the sorbent tube (ST) sampling of airborne phthalates. The recovery of phthalates was assessed critically in relation to four key sampling parameters: (1) three types of sorbent materials (quartz wool (QW), glass wool (GW), and quartz wool plus Tenax TA (QWTN)), (2) the concentrati...

Dextran sulfate was covalently bound to cellulose beads (LA01) and used as the specific sorbent of apolipoprotein B-containing lipoproteins. The binding profiles of very low density, low density, and high density lipoproteins to the material were consistent with simple Langmuir adsorption isotherms. Although the affinities of all lipoproteins for the sorbent were roughly similar, the surface ar...

Sorption systems are a prevalent technology in the field of environmental engineering for treating waters contaminated with organic and/or inorganic compounds. Examples of such contaminants include taste and odor, hardness, disinfection byproduct precursors, and arsenic. The primary operating costs for these sorption systems lie in sorbent replacement. Different column arrangements and the use ...

Natural biopolymers from plant sources contain many impurities (e.g., fat, protein, fiber, natural pigment and endogenous enzymes), therefore, an efficient purification process is recommended to minimize these impurities and consequently improve the functional properties of the biopolymer. The main objective of the present study was to investigate the effect of different purification techniques...

Biopolymer electrolyte based on carboxymethyl cellulose has been prepared by doping with different concentration of oleic acid via solution casting technique. Fourier Transform Infrared spectroscopy was used to study the complexation between the salt and polymer. New peak was observed at 1710, 2850, 2920 cm. X-ray diffraction study reveals the amorphous nature of the biopolymer electrolyte. Imp...

In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...

Fish scale biopolymer blended with nanocellulose crystals is used for production of microneedles applying mechanical press microfabrication and the effect of nanocellulose on microfabrication, water absorption, moisture stability and mechanical properties of the microneedles is reported. The results show that microneedles produced from the nanocellulose loaded fish scale biopolymer requires hig...