This work investigates the potential of coconut shell for air-steam gasification using thermodynamic equilibrium model. A thermodynamic equilibrium model considering tar and realistic char conversion was developed using MATLAB software to predict the product gas composition. After comparing it with experimental results the prediction capability of the model is enhanced by multiplying equilibriu...

A process model for pressurised fluidised-bed gasification of biomass was developed using Aspen Plus simulation software. Eight main blocks were used to model the fluidised-bed gasifier, complemented with FORTRAN subroutines nested in the programme to simulate hydrocarbon and NH3 formation as well as carbon conversion. The model was validated with experimental data derived from a PDU-scale test...

A process model for pressurised fluidized-bed gasification of biomass was developed using Aspen Plus simulation software. Eight main blocks were used to model the fluidized-bed gasifier, complemented with FORTRAN subroutines nested in the programme to simulate hydrocarbon and NH(3) formation as well as carbon conversion. The model was validated with experimental data derived from a PDU-scale te...

Hydrogen from Biomass as an energy carrier has generated increasing interest in recent years. There are several different technologies to convert solid or liquid Biomass into a gas mix consisting of mainly hydrogen and carbon dioxide. Up to 30% of the energy stored in the product gas would originate from the sun by using solar thermal applications to source the conversion while the equivalent o...

The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV) progressively...

Conversion of wet biomass via gasification in supercritical water is a promising technology for the production of hydrogen and methane from renewable resources. The properties of water above the critical point enable reactions for the fast degradation of biomass and generation of a product gas consisting of hydrogen, methane, higher hydrocarbons and carbon dioxide without disturbing sulphurand ...

In this work, an experimental study of biomass gasification in different operation conditions has been carried out in an updraft gasifier combined with a porous ceramic reformer. The effects of gasifier temperature, steam to biomass ratio (S/B), and reforming temperature on the gas characteristic parameters were investigated with and without porous ceramic filled in reformer. The results indica...

Due to the environmental and price issues of current energy crisis, scientists and technologists around the globe are intensively searching for new environmentally less-impact form of clean energy that will reduce the high dependency on fossil fuel. Particularly hydrogen can be produced from biomass via thermochemical processes including pyrolysis and gasification due to the economic advantage ...

Two sets of gasification experiments were performed in an effort to understand the fate of biomass nutrients and the effects of feedstock potassium on carbon conversion during gasification. The purpose of this research was to develop a comprehensive understanding of the issues of sustainability and efficiency facing biomass gasification. The results of these studies are described in detail with...

Hydrogen is an important chemical in many industries and it is expected to become one of the major fuels for energy generation in the future. Unfortunately, hydrogen does not exist in its elemental form in nature and therefore has to be produced from hydrocarbons, hydrogen-containing compounds or water. Above its critical point (374.8C and 22.1MPa), water has lower density and viscosity, and a ...