OBJECTIVE To evaluate the effects of recasting on the biocompatibility of a commercially available Ni-Cr alloy. METHODS The alloy tested was cast and subsequently recast four more times. For each cast condition, 24 disk shaped specimens were fabricated (5 mm in diameter, 0.5 mm in thickness). All the recasting was performed without adding new alloy. After the first cast and following each rec...

Rods of Ni-43.5wt% Ti alloy were prepared under various casting conditions. Specimens which were melted in a cordierite crucible and cast in a phosphate-bonded investment mold had less strength and elongation than those melted in a copper crucible and cast in a phosphate-bonded investment mold. All castings exhibited superelasticity at room temperature. The upper limit of recoverable strain was...

Abstract: Thermal fatigue is a stochastic process often showing considerable scatter even in controlled environments. Due to complexity of thermal fatigue, there is no a complete analytical solution for predicting the effect of this property on the life of various components, subjected to severe thermal fluctuations. Among these components, one can mention car cylinder, cylinder head and pi...

The hydrolysis of Mg-based materials appears to be an ideal solution for clean energy production. Green hydrogen was produced by the reaction a “standard” AZ91 alloy (called in following) “model” seawater solution. Two milling speeds (i.e. 250 rpm and 350 rpm) were tested enhance reactivity AZ91. Graphite AlCl3 used as ball additives. Milling at higher rotational speed is more energetic, hence ...

Ferrous metals include cast iron, steel, and the various steel alloys, The only difference between iron and steel is the carbon content. Cast iron contains more than 2-percent carbon, while steel contains less than 2 percent. An alloy is a substance composed of two or more elements. Therefore, all steels are an alloy of iron and carbon, but the term “alloy steel” normally refers to a steel that...

PURPOSE The aim of this systematic review was to determine which dowel (post) and core system is the most successful when used in vivo to restore endodontically treated teeth. MATERIALS AND METHODS A MEDLINE, a Cochrane, and an EMBASE search (three specified searches) were conducted to identify randomized (RCT) and nonrandomized controlled clinical trials (CCT), cohort (CS), and case control ...

AIM The purpose of this in vitro study was to investigate the marginal accuracy and internal fit of complete cast crowns and three-unit fixed partial dentures (FPDs) cast with commercially pure titanium (CPTi) and Titanium-Aluminum-Vanadium alloy (Ti-6Al-4V). METHODS AND MATERIALS CPTi and Ti-6Al-4V alloy were used to cast twelve single crowns and twelve three-unit FPDs. A traveling microscop...

INTRODUCTION Root canal-treated teeth are weaker than vital teeth and are more susceptible to fractures. Therefore, special precautions should be adhered to, such as the use of various types of cast or prefabricated posts. Regarding the effect of post material on fracture resistance of teeth, the aim of this in vitro study was to evaluate the effect of non-precious gold color alloy (NPG) and ni...