Electrochemical impedance spectroscopy was used as an in situ technique to determine the average particle size of metal hydride electrodes. Using this, the pulverization of bare and cobalt-encapsulated LaNi Sn alloy was studied as a function of charge–dis4.27 0.24 charge cycles. In the case of bare alloy, pulverization causes an exponential decay in particle size with cycling. Cobalt-encapsulat...

The galvanic corrosion behavior of Alloy 690 coupled with magnetite has been investigated in an alkaline solution at 30 °C and 60 °C using a potentiodynamic polarization method and a zero resistance ammeter. The positive current values were recorded in the galvanic couple and the corrosion potential of Alloy 690 was relatively lower. These results indicate that Alloy 690 behaves as the anode of...

We present Prioni, a tool that integrates model checking and theorem proving for relational reasoning. Prioni takes as input formulas written in Alloy, a declarative language based on relations. Prioni uses the Alloy Analyzer to check the validity of Alloy formulas for a given scope that bounds the universe of discourse. The Alloy Analyzer can refute a formula if a counterexample exists within ...

in the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized aa6061 aluminum alloy produced by equal channel angular pressing (ecap) process were investigated. the grain refinement after two passes of ecap significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. however, the improvement of low cycle fati...

alloy steel, which is versatile in such qualities as grade, property and application, can play an important role in the technical and economic development of the country. the present consumption of the key industrial sector to this strategic material, specified basically as semi- finished products exceeds 100,000 tons per year. however, a rough estimation of the true potential needs, does clear...

in this study, cu50-ni50 alloy were synthesized by mechanical alloying. the alloy was then reinforced by dispersion of multiwalled carbon nanotubes using a planetary high energy ball mill. x-ray diffraction, scanning electron microscopy and vibrating sample magnetometer were used to evaluate the effects of cnt addition on the characteristics of the nanocomposites. xrd results of cu-ni sample sh...

To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...

Cr-Fe-C alloy deposits were successfully prepared on high-carbon tool steel in a Cr3+-based electroplating bath containing Fe2+ ions and suitable complex agents. A Cr-based alloy deposit was obtained with an electroplating current density higher than 25 Adm-2, and a Fe-based alloy deposit was obtained using a current density of 20 Adm-2. Following electroplating, these alloy deposited specimens...

Microstructural and electrical properties of Cu-chromium alloy (Cu-Cr) dispersed with vapor-grown carbon fiber (VGCF) prepared by powder metallurgy (P/M) process have been investigated. Cu-0.7 mass% Cr pre-alloyed powder (Cu-Cr) made by water atomization process was used as raw materials, which contained solid solute Cr elements in Cu matrix. The alloy powder coated with un-bundled VGCF by usin...

Al-5Ti-C master alloy was prepared and used to modify hypereutectic Al-20%Si alloy. The microstructure evolution and mechanical properties of hypereutectic Al-20%Si alloy with Al-5Ti-C master alloy additions (0, 0.4, 0.6, 1.0, 1.6 and 2.0 wt%) were investigated. The results show that, Al-5Ti-C master alloy (0.6 wt%, 10 min) can significantly refine both eutectic and primary Si of hypereutectic ...