Nanofluid is a new class of heat transfer fluids engineered by dispersing metallic or non-metallic nanoparticles with a typical size of less than 100 nm in the conventional heat transfer fluids.This article aims to investigate the overall and convection heat transfer coefficient and Nusselt number of Al2O3-water nanofluid flowing in a horizontal double pipe heat exchanger under turbulent flow (...

The objective of this study is to numerically investigate the convective heat transfer of water-based Al2O3 nanofluids flowing through a square cross-section duct with a constant heat flux under laminar flow conditions. The effects of nanoparticle concentration and Peclet number on the heat transfer characteristics of Al2O3-water nanofluids are investigated. The nanoparticle diameter is 25 nm a...

This study investigates a hybrid nanofluid flow towards stagnation region of vertical plate with radiation effects. The consists copper (Cu) and alumina (Al2O3) nanoparticles which are added into water to form Cu-Al2O3/water nanofluid. point describes the fluid motion in solid surface. In this study, both buoyancy assisting opposing flows considered. similarity equations obtained using transfor...

The problem of steady Marangoni boundary layer flow and heat transfer in a nanofluid when the wall is permeable, namely there is a suction or injection effect, is studied using different types of nanoparticles. The mathematical problem reduces to a pair of coupled ordinary differential equations by similarity transformation, which is then solved numerically using the shooting method. Three diff...

The attention of researches in convective heat transfer by suspended nanoparticles base fluids has grown lately to promote uncommon techniques for enhancing the thermal performance fluids. In this study, stability period and properties aluminium oxide (Al2O3), silicon dioxide (SiO2) Al2O3–SiO2 hybrid were investigated at volume concentration 0.1vol.% dispersed Distilled Water (DW) as a fluid. Fo...

The present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of Al2O3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.Laminar fully developed flow heat transfer coefficient of Al2O3 nanoparticles are dispersed in water in circular tube is discussed in this paper. In order to valid...

The present work is an experimental study of steady state convective heat transfer of de-ionized water with a (0.04% by volume) volume fraction of Al2O3 nanoparticles dispersed to form a nanofluid that flows through an aluminium tube.Laminar fully developed flow heat transfer coefficient of Al2O3 nanoparticles are dispersed in water in circular tube is discussed in this paper. In order to valid...

this paper presents a comprehensive theoretical, experimental, and economic study on the application of nanofluids as heat transfer fluid in waste heat recovery systems. the research work was conducted in a steel-making complex in which a plate heat exchanger had been used to recover heat from hot process water. the system was theoretically modelled and the effects of using nanofluids as heat t...

the forced convection heat transfer of turbulent al2o3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. the governingequations have been solved using finite volume method (fvm) coupled with simple algorithm. it isassumed the heat flux is constant on the grooved walls. the single-phase approach is applied for the...

In this study, the two-dimensional Magnetohydrodynamic (MHD) boundary layer of stagnation-point flow in a nanofluid in the presence of thermal radiation is investigated. Using a similarity transform, the NavierStokes equations are reduced to a set of nonlinear ordinary differential equations. The similarity equations are solved numerically for three types of nanoparticles, namely copper (Cu), a...