Biomass and other carbonaceous materials can be gasified to produce syngas with high concentrations of CO and H2. Feedstock materials include wood, dedicated energy crops, grain wastes, manufacturing or municipal wastes, natural gas, petroleum and chemical wastes, lignin, coal and tires. Syngas fermentation converts CO and H2 to alcohols and organic acids and uses concepts applicable in ferment...

Improvement in sensing layer properties of quartz crystal microbalance (QCM) sensors are crucial developing gas with high sensitivity and selectivity. In this work, we study the use chitosan thin film as on a QCM sensor to identify presence volatile organic compounds specifically isopropyl alcohol (IPA). The effect dissolved different acetic acid concentrations towards overlay performance were ...

CO2 is the main greenhouse gas which causes global climatic changes on larger scale. Many techniques have been utilised to capture CO2. Membrane gas separation is a fast growing CO2 capture technique, particularly gas separation by composite membranes. The separation of CO2 by a membrane is not just a process to physically sieve out of CO2 through the controlled membrane pore size. It mainly de...

The effect of ultrasound on the pseudo-solubility of nitrogen in water and on gas-liquid mass transfer kinetics has been investigated in an autoclave reactor equipped with a gas induced impeller. In order to use organic liquids and to investigate the effect of pressure, gas-liquid mass transfer coefficient was calculated from the evolution of autoclave pressure during gas absorption to avoid an...

[1] Key steps leading to the uptake of trace gases into atmospheric cloud ice particles include gas phase diffusion of trace gas molecules toward growing ice crystals and the kinetics of molecular interactions at the ice surfaces. In the case of nitric acid, laboratory studies and airborne field observations indicate uptake in growing ice films and cirrus ice particles above the thermodynamic s...

Descriptors in the Abraham equations for all the 209 PCBs have been obtained from literature chromatographic data. The six descriptors suffice for the prediction of water to octanol partitions, and for the prediction of various water to solvent and gas to solvent partitions, solubility in water, and water to micelle partition. For water to octanol, gas to dry octanol, gas to wet octanol, solubi...

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher t...

Elemental sulfur (S8) is often present in considerable amounts in sour gas reservoirs at the reservoir conditions (pressure and temperature). For the isothermal conditions in the reservoir, the reduction in reservoir pressure below a critical value will cause the elemental sulfur to deposit in the formation. Sulfur deposition can cause severe loss in the pore space available for gas, and in tur...

The sorption of carbon dioxide in poly(lactic acid) (PLA) was studied by quartz crystal microbalance at high pressures. To address the effect of the D isomer present in the polymer on the gas sorption, measurements were performed in PLA with two different L:D contents, 80:20 and 98:2. New data for the solubility of carbon dioxide in PLA 80:20 and PLA 98:2 over a temperature range from 303.2 to ...