Bulk Cu-Ti alloy reinforced by TiB2 nano particles was prepared using in-situ reaction between Cu3.4wt.% Ti and Cu-0.7wt.% B along with rapid solidification and subsequent heat treatment for 1-10 hrs at 900oC. High-resolution transmission electron microscopy (HRTEM) characterization showed that primary TiB2 nano particles and TiB whiskers were formed by in-situ reaction between Ti and B in the ...

This thesis focuses on studies of nano-scale materials in electronic packaging applications with respect to following aspects: surface analysis of nano-scale oxide of lead-free solder particles, and thermal performance and mechanical property studies of nano-scale fiber and metal composite-based thermal interface materials. The composition and thickness of the solder oxide have a direct impact ...

ISSN 2250 – 1088 | © 2011 Bonfring Abstract--This paper presents a high-Q MWCNT (Multi Wall Carbon Nano-Tube) network based pulse-shaped on-chip embedded nano-inductor for power electronic circuits. This high-Q inductor is fabricated using a composite of MWCNT (multi Wall Carbon Nano Tube) network and Fe in semiconductor processing environment. A layer of nano composite film (Cu/CoFe2o4) is pat...

A nano-composite powder composed of silica and carbon with a unique property could be prepared from a mixture of a silicate compound and an epoxy compound, in which the silica within the nano-composite powder has a BET surface area of as high as greater than 800m2/g although the nano-composite powder has a BET surface area of less than 10m2/g. It was estimated that the silica and the carbon are...

abstract background and aim: one of the major problems with resin composite restorations is the weakness of bonding between the new and aged composites. since appropriate micromechanical retention is necessary for the repair of aged resin composite restorations, the level of surface roughness after sandblasting can be influential in this regard. considering the diverse composition of available ...

Photo-catalysts have many applications in different fields of industry especially in elimination of pollutants and heavy metals from wastewater. In this study first three component nano composite and two components nano composite were prepared. These composite were applied on non-woven textiles by Pad-dry method and their effect on elimination of color and heavy metals were investigated. Morpho...

This paper presents the wear characteristics of the composite ceramic coating made with Al2O3-40wt%8YSZ on the biomedical grade Ti-6Al-4V alloy (grade 5) used for total joint prosthetic components, with the aim of improving their tribological behavior. The coatings were deposited using a plasma spraying technique, and optimization of plasma parameters was performed using response surface method...

The implementation of nano-additives in machining fluid is significant for manufacturers to attain a sustainable manufacturing process. material removal rate (MRR) process transforming solid raw materials into specific shapes and sizes. This has many challenges due friction, vibration, chip discontinuity when aluminum alloy, which led poor accuracy affected the fatigue life developed material. ...

ticl4, ammonia, inorganic salts as raw material, nanometer composite-crystal tio2 powders were synthesized by two-step chemical method. precursors were crystallized with different phase and stable composite-crystal tio2 with anatase and rutile phase was prepared at low temperature. quantitative control of crystal phase was realized. remarkable factors including reaction ph value, reaction time,...