OBJECTIVE To determine the microchemical and surface composition of tibial plateau leveling osteotomy (TPLO) plates before and after explantation. SAMPLE POPULATION 7 TPLO plates surgically removed from host dogs 6 to 54 months after implantation; 2 raw unpolished-and-unpassivated 316L TPLO plates; and 2 heat-treated, polished-and-passivated, and cleaned 316L TPLO plates. PROCEDURES Samples...

Grey relational analysis is useful for the multi-input, discrete data and uncertain experimental study. Developed in this paper is the application of the grey relational analysis for optimizing the electropolishing of 316L stainless steel with multiple performance characteristics. The processing parameters (temperature, current density, and electrolyte composition) are optimized with considerat...

The local electrochemical properties of galvanic corrosion for three coupled metals in a desalination plant were investigated with three wire-beam electrodes as wire sensors: aluminum brass (HAl77-2), titanium (TA2), and 316L stainless steel (316L SS). These electrodes were used with artificial seawater at different temperatures. The potential and current-density distributions of the three-meta...

Stainless steel 316L has widely used as bioimplants in cranial plates, dental implants, bone fracture fixation, prothestic joints. However, low wear resistance, in some cases susceptibility to pitting and crevice corrosion in body environment and release of toxic ions from the surface are the basic disadvantages which this material prone to be. It has still applied as a temporary biomaterial du...

The microstructure of 8 mm diameter wire produced by the severe deformation of 316L austenitic stainless steel has been examined using TEM and X-ray diffraction. The deformation imparted amounts to a true strain of 6.3. Data from previous studies on strain induced transformation of this steel have been combined with new results to show that true strains .2 are required in order to observe mecha...

In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...

In this study, a porous oxide layer was formed on the surface of 316L stainless steel (SS) by combining Ti magnetron sputtering and plasma electrolytic oxidation (PEO) with the aim to produce a polymer-free drug carrier for drug eluting stent (DES) applications. The oxidation was performed galvanostatically in Na3PO4 electrolyte. The surface porosity, average pore size and roughness varied with...

OBJECTIVE Report the invention and structural analysis of the new model of anterior spinal instrumentation (KKU expandable cage) that is expandable for space filling after vertebral body resection while simultaneously stabilize the upper vertebra with the lower vertebra, to tolerate the thoracolumbar physiologic load and augment the interbody arthrodesis of the spine. MATERIAL AND METHOD The ...

Surface smoothness is one of the properties determining the performance of stents. Therefore, surface polishing shows its importance in the exploitation and production of stents. The present study explores electrochemical polishing of 316L stainless steel slotted tube coronary stents produced by laser cutting. Acid pickling was also studied as a pre-treatment of electrochemical polishing of the...

Thermal treatment or hyperthermia has received considerable attention in recent years due to its high efficiency, safety and relatively few side-effects. In this study, we investigated whether it was possible to utilize targeted thermal or instent thermal treatments for the treatment of restenosis following percutaneous transluminal coronary angioplasty (PTCA) through magnetic stent hyperthermi...