The aim of this work is to determine the fatigue life of 316L stainless steel. The mechanisms of fatigue of 316L stainless steels were investigated and discussed. The fatigue tests were carried out at constant-amplitude cyclic loading with load ratio R=0.1. Scanning Electron Microscope (SEM) is then used to examine the fracture surface. The results show that the fatigue limit of 316L stainless ...

INTRODUCTION Intravascular coronary stenting has been used in the treatment of coronary artery disease (CAD), with a major limitation of in-stent restenosis (ISR). The 316 stainless steel has been widely used for coronary stents. In this study, we developed a novel coating method to reduce ISR by simultaneously coating vascular endothelial growth factor (VEGF) and anti-CD34 antibody on 316L sta...

The evaporation of inertial confinement fusion first wall materials from unattenuated pellet X-rays and from radiation emitted by a cavit.y buffer qas is examined. The low vapor pressure and low X-ray attenuation coefficient of carbon give it a lower erosion rate than stainless steel, despite the larger thermal conductivity of Type 316 stainless steel. For the argon buffer gas containing 0.2% N...

Chloride-induced corrosion of carbon steel reinforcement is the main cause of deterioration of reinforced concrete (RC) structures in marine environments. One of the ways to protect RC structures from corrosion is to use corrosion-resistant stainless steel reinforcing bars. However, stainless steel is between six and nine times more expensive than carbon steel. Thus, its use can only be justifi...

Layers of high silica zeolites, synthesized with an organic structure directing agent (OSDA) and grown onto porous support structures, frequently suffer from the thermal stress during the removal of OSDA via the calcination process. The different thermal expansion coefficients of the zeolite and the support material, especially when stainless steel is used as a support, causes enormous tension ...

In this research work, the effectiveness of stainless steel sheet for the production of motor cycle exhaust muffler burn protector was investigated. Energy Dispersive X-Ray fluorescence method was used to determine the chemical composition of the stainless steel materials and exhaust muffler of the motor cycle. The stainless steel sheet was perforated and folded to frustum shape to achieve aero...

OBJECTIVES The aim of the study was to assess the risk of cancer among workers employed in the Finnish ferrochromium and stainless steel industry since the beginning of production in 1967. METHODS The study cohort was made up of all persons employed by the Finnish stainless steel production chain from chromite mining to cold rolling of stainless steel during the period 1967-2004, and it was d...

Cold rolling of austenitic stainless steel results in increase of residual stresses, hardness, and tensile strength and dislocation density. We have studied the response of eddy current impedance to austenitic change, hardness and its lift off phase in stainless steels during cold reductions. A series of samples of austenitic stainless steel alloys were cold rolled and found that only percentag...

INTRODUCTION The purpose of the present study was to investigate and compare early biofilm formation on biomaterials, which are being used in contemporary fixed orthodontic treatment. METHODS This study comprised 10 healthy volunteers (5 females and 5 males) with a mean age of 27.3 +-3.7 years. Three slabs of different orthodontic materials (stainless steel, gold and ceramic) were placed in r...

dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. in this study, x53crmnnin219 (austenitic stainless steel) and x45crsi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. the welded joint was then heat treated at 760 0c for 60 min. mechanical prop...