TITANIUM is a low-density element (approximately 60% of the density of steel and superalloys) that can be strengthened greatly by alloying and deformation processing. (Characteristic properties of elemental titanium are given in Table 2.1.) Titanium is nonmagnetic and has good heat-transfer properties. Its coefficient of thermal expansion is somewhat lower than that of steel and less than half ...

INTRODUCTION: The majority of interbody devices for spine fusion are PEEK. Other interbody devices use a rough 2D titanium surface or full porous titanium or tantalum cores, which have been shown in-vitro and in-vivo to promote osteoinduction and osteointegration, respectively. Combining the increased osteogenic environment that titanium provides and the minimized subsidence and radiolucency fr...

OBJECTIVES To research the crystal structure and surface morphology of anodic films on titanium metal in different electrolytes under various electrochemical conditions and investigate the effect of the crystal structure of the oxide films on apatite-forming ability in simulated body fluid (SBF). METHODS Titanium oxide films were prepared using an anodic oxidation method on the surface of tit...

A major consideration in designing dental implants is the creation of a surface that provides strong attachment between the implant and bone, connective tissue, or epithelium. In addition, it is important to inhibit the adherence of oral bacteria on titanium surfaces exposed to the oral cavity to maintain plaque-free implants. Previous in vitro studies have shown that titanium implant surfaces ...

Titanium and its alloys are widely used in aircraft, rocket production, shipbuilding, machine industry, chemical and food industry, medicine due to their high specific strength, good corrosion resistance and biological passivity. However, titanium has properties which limit its application as construction material. Particularly, tendency to surface adhesion and galling at friction results in it...

PURPOSE To verify if titanium spiral tacks may contribute to intra-abdominal adhesion formation in rabbits. METHODS Ten New Zealand white rabbits were used. Through videolaparoscopic surgery two titanium spiral tacks (ProTack(®), Covidien(®)) were applied in the right flank. After 30 days the animals were submitted to evaluate peritoneal cavity by videolaparoscopy. RESULTS No adhesion was f...

The aim of this study was to compare the shear bond strengths (SBS) of cast, machined, and laser-sintered titanium to dental porcelain. Two kinds of dental porcelains (Titankeramik and Triceram) were applied on cast (Tritan), machined (DC-Titan), and laser-sintered (EOSINT) titanium specimens (n=10). SBS test was conducted, and fracture surface analysis was also performed to determine the failu...

The disadvantages of allografts to restore femoral bone defects during revision hip surgery have led to the search for alternative materials. We investigated the feasibility of using porous titanium particles and posed the following questions: (1) Is it possible to create a high-quality femoral graft of porous titanium particles in terms of graft thickness, cement thickness, and cement penetrat...

Titanium-silicon alloys have been electrochemically extracted from the multi-component titanium compounds in molten calcium chloride electrolyte. Sintered pressed pellets of titanium-bearing compounds served as the cathode, and the electrochemical experiments were systematically carried out at 900 °C, 3.1 V and 1000 °C, 3.8 V using a graphite-based anode and an improved inert-oxygen-ion-conduct...