Al, Au, Ti/Al and Ti/Au contacts were prepared on n-GaN and annealed up to 900 8C. The structure, phase and morphology were studied by cross-sectional transmission and scanning electron microscopy as well as by X-ray diffraction (XRD), the electrical behaviour by current–voltage measurements. It was obtained that annealing resulted in interdiffusion, lateral diffusion along the surface, alloyin...

Based on first-principles calculations including a Coulomb repulsion term, we identify trends in the electronic reconstruction of $A$NiO$_2$/SrTiO$_3$(001) ($A=$ Pr, La) and $A$CuO$_2$/SrTiO$_3$(001) Ca, Sr). Common to all cases is emergence quasi-two-dimensional electron gas (q2DEG) SrTiO$_3$(001), albeit higher polarity mismatch at interface nickelates vs. cuprates nonpolar SrTiO$_3(001)$ sub...

In this work, mechanical alloying was employed to produce Ti-50Al and Ti-45Al-5Cr (at%) alloys. Alloying was performed in a planetary mill and the alloying time varying from 5 to 70h. Characterization of the powder mixture was performed by X-ray diffraction (XRD), SEM analyses and DTA test, during mechanical alloying and after annealing at 1100°c in vacuum oven. The results showed, after 50h of...

The electrical, thermal, and microstructural characteristics of Ti/Al/Ti/Au ~30 nm/100 nm/30 nm/30 nm! multilayer Ohmic contacts to n-GaN ~doping level 5310 cm) were studied. The lowest contact resistivity derived from the annealed contact was rS53.0310 V cm. The contacts were robust and showed high-thermal stability. X-ray diffraction and Auger electron spectroscopy studies were made to invest...

in the present work, structural characteristics and tribological properties of the ti-al-cr-(si)-c-n nanocomposite films coated on the spk 1.2080 tool steel bypvd technique have been investigated. the pvd coating process was carried out using ti (si) al and cral cathodes at 150 a current, 40 v bias and (ar)0.1(ch4)0.45(n2)0.45 gas mixture for 50 min. evaluations were conducted by om, fesem, afm...

In the present study, the influence of substitutional elements (Ti and Al) on the structural stability, mechanical properties, electronic properties and Debye temperature of Ta5Si3 with a D8m structure were investigated by first principle calculations. The Ta5Si3 alloyed with Ti and Al shows negative values of formation enthalpies, indicating that these compounds are energetically stable. Based...

In the last decades, the class of Ti-rich TiAl-based intermetallic materials has replaced many contemporary alloys till 900 °C. Due to higher oxidation resistance, 20% lower density and higher (about 150 °C more) operating temperature possibility of Al-rich TiAl alloys over Ti-rich side, phases from the Al-rich region of this alloy system are considered to be highly potential candidates for hig...