Varying atomic short-range order is correlated with the ratio of the monoclinic (m) to tetragonal (t) phase in ZrO2 nanoparticle formation by solvothermal methods. Reactions from Zr oxynitrate in supercritical methanol and Zr acetate in water (hydrothermal route) were studied in situ by X-ray total scattering. Irrespective of the Zr source and solvent, the structure of the precursor in solution...

The amount of oxygen storage and release from catalysts on a millisecond scale (MS-OSC) is believed to play an essential role in automotive three-way catalysts. We have developed a new method to evaluate the MS-OSC based on the rapid detection of reaction products on catalyst surfaces immediately after CO and O2 injections using pulsed valves by time-of-flight mass spectrometry. CO and O2 were ...

Bacterial invasion on biomedical implants is a challenging task for long-term and permanent implant fixations. Prevention of initial bacterial adherence on metallic implants is an important concern to avoid extracellular matrix (biofilm) secretion from bacteria that is resistant to antibacterial agents. In order to overcome this defect, recently, surface coatings such as zirconia (ZrO2) with hi...

In this paper, in order to improve the efficiency of dye-sensitized solar cells, we introduced zirconia [ZrO2] nanofibers into a mesoporous titania [TiO2] photoelectrode. The photoelectrode consists of a few weight percent of ZrO2 nanofibers and a mesoporous TiO2 powder. The mixed ZrO2 nanofibers and the mesoporous TiO2 powder possessed a larger surface area than the corresponding mesoporous Ti...

The atomic scale homogeneity of Ce and Zr oxygen bonds represents the main reason for enhanced total oxygen storage capability of CeO2-ZrO2 (Ce/Zr = 1) as compared to that of CeO2. Here, we demonstrate that the addition of 10% Eu(3+) by wet impregnation on preformed nanosized CeO2-ZrO2 (Ce/Zr = 1) followed by calcination induces a remarkable homogeneity of 10% Eu(3+)-CeO2-ZrO2 solid solution. B...

This paper reports on the use of nanoporous Pt-TiO2 thin films coated onto magnetoelastic sensors for the detection of ethylene, an important plant growth hormone. Five different metal oxide coatings, TiO2, TiO2+ZrO2, TiO2+TTCN(1,4,7Trithiacyclononane)+Ag, SiO2+Fe, and TiO2+Pt, each having demonstrated photocatalytic activity in response to ethylene, were investigated for their ability to chang...

Nucleation and growth of transition metals on zirconia has been studied by scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. Since STM requires electrical conductivity, ultrathin ZrO2 films grown by oxidation of Pt3Zr(0001) and Pd3Zr(0001) were used as model systems. DFT studies were performed for single metal adatoms on supported ZrO2 films as well as the (1̅...

Although homogeneity at the atomic level of CeO2-ZrO2 with a Ce/Zr atomic ratio close to unity is considered to be one of the main causes for the increased total oxygen storage capacity (OSC), the characterization approaches of homogeneity remain a major challenge. We propose a simple, yet effective method, to assess both structural and compositional homogeneity of CeO2-ZrO2 by using Eu(3+) lum...

Monitoring automotive exhaust gas aftertreatment components is required by law as part of the on-board diagnostics (OBD). For this purpose, a novel sensor device that determines directly the catalyst conversion could be used. It consists of a single, self-heated yttria stabilized ZrO2-based disc, separating two gas atmospheres. Two identical mixed-potential electrodes yield a voltage signal by ...

STATEMENT OF PROBLEM The whitish color of zirconia (ZrO2) abutments offers favorable esthetics compared with the grayish color of titanium (Ti) abutments. Nonetheless, ZrO2 has greater opacity, making it difficult to achieve natural tooth color. Therefore, lithium disilicate (LaT) abutments have been suggested to replace metal abutments. PURPOSE The purpose of this in vitro study was to evalu...