La2Zr2O7 (LZO) films were grown on different buffer architectures by radio frequency magnetron sputtering for the large-scale application of YBa2Cu3O7-x (YBCO)-coated conductors. The three different buffer architectures were cerium oxide (CeO2), yttria-stabilized zirconia (YSZ)/CeO2, and CeO2/YSZ/CeO2. The microstructure and surface morphology of the LZO film were studied by X-ray diffraction, ...

Solid oxide fuel cells (SOFCs) are promising electrochemical energy conversion devices owing to their high power generation efficiency and environmentally benign operation. Micro-tubular SOFCs, which have diameters ranging from a few millimeters to the sub-millimeter scale, offer several advantages over competing SOFCs such as high volumetric power density, good endurance against thermal cyclin...

Porous composites of Sr0.88Y0.08TiO3-δ (YST) and yttria-stabilized zirconia (YSZ) were formed by tapecasting methods and examined as potential anodes for SOFC. Even after calcination to 1773 K, the YSZ and YST crystallites remain as separate phases, as demonstrated by XRD and SEM with EDX analysis. Furthermore, it was possible to fabricate anode-supported electrolytes by calcination of a bilaye...

We use spatially resolved photoelectron spectroscopy performed in operando to identify the reaction intermediates of the hydrogen electro-oxidation reaction on yttria-stabilized zirconia (YSZ) electrolytes with Pt electrodes. We find that hydroxyl on the zirconia electrolyte is a reaction intermediate in the hydrogen oxidation reaction and that it participates in the rate-determining step. In c...

Ceramic membrane composites consisting of a coarse porous a-alumina or two-layer porous alumina membrane support and an oxygen semipermeable gas tight thin (0.2-5 pm) yttria stabilized zirconia (YSZ) film are prepared by the electrochemical vapor deposition (EVD) method. The minimum gastight thickness of the YSZ films depends strongly on the average pore size of the support on which the films a...

In the present work, 5 wt.% and 10 yttria-stabilized zirconia (YSZ) nanoparticles were reinforced in Ni-20Cr powder deposited on boiler tube steel using a high-velocity oxy-fuel spraying process. The effect of YSZ reinforcement microhardness, surface roughness porosity was investigated. hardness highest for nanocomposite coating with found to increase decrease porosity. microstructure elements ...

In this study, the effect of a thermal barrier coating with yttria-stabilized zirconia (YSZ) and aluminum silicate (Al2O3·SiO2) alongside an NiCrAl bond coat on engine performance emission analysis was evaluated by using conventional diesel pure palm oil biodiesel. These materials were coated piston alloy via plasma spray coating. The findings demonstrated that YSZ presented better performances...

In the present work, surface characterization of YSZ/Al2O3 /CeO2 plasma sprayed coatings was performed to understand characteristics. The content Yttria-stabilized zirconia (YSZ) 60 wt.% , where alumina varied from 30 38 and CeO2 2 10 wt.%, respectively. Ceramic with a different percentage variation composite materials were used increase layer strength on substrate SS-304. SEM micrographs analy...

We describe a fabrication strategy for preparing yttria-stabilized zirconia nanotube (YSZ-NT) arrays embedded in porous alumina membranes by means of template-directed atomic layer deposition (ALD) technique. The individual YSZ-NTs have a high aspect-ratio of well over 120, about ~ 110 nm in diameter, and ~ 14 µm in length. Interfacing the tube arrays with porous Pt was also introduced on the b...

Anode aluminum oxide-supported thin-film fuel cells having a sub-500-nm-thick bilayered electrolyte comprising a gadolinium-doped ceria (GDC) layer and an yttria-stabilized zirconia (YSZ) layer were fabricated and electrochemically characterized in order to investigate the effect of the YSZ protective layer. The highly dense and thin YSZ layer acted as a blockage against electron and oxygen per...