in the present study, the microstructure and mechanical properties of the dissimilar welding betweenastm a335 low alloy steel and er309l austenitic stainless steel were investigated using the gastungsten arc welding process. the welding of dissimilar materials between astm a335 low alloy steeland er309l austenitic stainless steel was found to have a significant effect on the microstructure when...

an artificial neural network (ann) model is developed for the analysis, simulation, and prediction of the austenite reversion in the thermo-mechanical treatment of 304l austenitic stainless steel. the results of the ann model are in good agreement with the experimental data. the model is used to predict an appropriate annealing condition for austenite reversion through the martensite to austeni...

This work focuses on the ultrasonic characterization and hardness of Austenitic stainless steel in thermal variation. The sample which was heat treated at 1050 o C has the highest hardness value and plays a dominant role in dispersion of carbides. Shear wave velocity and hardness show similar trend in variation with temperature. The effect of volume expansion would be to decrease the elastic co...

In the present work CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and AISI 1009 low carbon steel plates. Laser power, welding speed, and defocusing distance combinations were carefully selected with the objective of producing welded joint with complete penetration, minimum fusion zone size and acceptable welding pro...

in the present study, the effect of grain size on the austenite stability was studied by nanoindentationtests in a 304l stainless steel. thermomechanical processing based on cold rolling and annealing wasused to produce two different types of austenite: ultrafine grained (ufg) austenite with the averagegrain size of 0.65 μm and coarse grained (cg) austenite with the average grain size of 12 μm....

the present article considers the nd:yag pulsed laser welding of 304 stainless steels with two different compositions. the effects of various laser operational parameters and cooling rates on the weld microstructures were considered. the results show that ferritic solidification is produced in the stainless steel with the creq/nieq ratio of 1.7, and austenitic solidification is produced in the ...

In the present study, the microstructure and mechanical properties of the dissimilar welding between ASTM A335 low alloy steel and ER309L austenitic stainless steel were investigated using the gas tungsten arc welding process. The welding of dissimilar materials between ASTM A335 low alloy steel and ER309L austenitic stainless steel was found to have a significant effect on the microstructure w...

the austenitic stainless steel (ss) has been used as a material for  building  ultra  high  vacuum  (uhv)  chamber.  recently significant  efforts  have  been  concerned  a  comparing  the standard  cleaned  for  ultra  high  vacuum,  passivity  stainless. in  this work austenitic  nanocomposites were  synthesize by sol-  gel method. the morphologies  and  topographies  of  the samples  have  b...

The present work has been carried out to study the sensitization behavior of AISI 304L austenitic stainless steel weld, fabricated using GTAW (gas tungsten arc welding process). This weld was subjected to post weld thermal aging (PWTA) treatments lying in the sensitization range, viz. 700 ?C for 30 minutes, 500 minutes and 1000 minutes for studying the influence of carbide precipitation on thei...

Mature passive films (age > 10 s) were grown in aerated saturated calcium hydroxide solution, at the open circuit, on plain steel and alloys with 9% and 22% Cr, as well as austenitic stainless steels. The materials were commercially produced concrete reinforcing steels. Differences in the polarization of the oxygen reduction reaction were evidenced. Oxygen reduction rates at moderate cathodic p...