In this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from Isfahan Steel Mill for cement. The control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. The Slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

Plastic concrete consists of aggregates, cement, water and bentonite, mixed at a high water cement ratio, to produce a ductile material. It is used for creating an impermeable barrier (cut-off wall) for containment of contaminated sites or seepage control in highly permeable dam foundations. The effects of water to binder ratio and clay dosage on mechanical properties of plastic concrete were i...

In this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from Isfahan Steel Mill for cement. The control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. The Slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...

Shock Wave Propagation in Cementitious Materials at Micro/Meso Scales Report Title Shock wave response of heterogeneous materials like cement and concrete is greatly influenced by the constituents and their statistical distributions. The microstructure of cement is complex due to the presence of unhydrated water, nano/micro pores, and other hydrated and unhydrated products, such as the C-S-H ge...

The influence of water-to-cement mass ratio (w/c) on early-age properties of cementbased materials is investigated using a variety of experimental techniques. Properties that are critical to the early-age performance of these materials are tested, including heat release, semiadiabatic temperature, setting time, autogenous deformation, and strength development. Measurements of these properties u...

Magnesium oxychloride cement (MOC) foam concrete (MOCFC) is an air-hardening cementing material formed by mixing magnesium chloride solution (MgCl2) and light-burned magnesia (i.e., active MgO). In application, adding caustic dolomite powder into magnesite can reduce the MOCFC production cost. The brine content of MOC changes with incorporation powder. This study investigated relationship betwe...

In this paper, using sewage sludge carried out to manufacture high performance ceramsite. At the same time, the performance of concrete made from sewage sludge ceramsite was analyzed. The results show that the ceramist is mainly composed of cristobalite and mullet, and has dense enamel structure on surface and honeycomb closed fine porous structure in internal. Too large ceramsite size can caus...