BACKGROUND Home bleaching agents may exert some negative effects on surface hardness of restorative materials such as glass-ionomer cements (GICs). Since some studies have shown that some components such as hydroxyapatite (HA), as a bioactive glass, can improve the mechanical properties of dental materials, the effect of bleaching agents on surface hardness of GICs containing hydroxyapatite is ...

The Ti-6Al-6Mo alloy was arc-melted eight times from pure Ti, Al, and Mo. The Ti6Al-6Mo were analyzed by using an optical microscope, SEM-EDS, XRD and Vickers Hardness Tester. Corrosion test was performed by using Hank’s solution at 37 °C and pH 7.4. The optical micrograph showed a similar structure of this alloy. The microstructure of Ti 6Al6Mo was basketweave with  lath. The map of Ti, Al an...

Ten 35Ag-30Pd-20Au-15Cu alloys containing 0.00, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50, 2.00, 4.00, or 6.00% Ga were experimentally prepared to investigate the effect of Ga on their mechanical properties in addition to their use for denture frameworks, connectors and clasps. The effect of Ga addition on the mechanical properties was marked with a significant increase in the tensile strength, 0.2% o...

Different hardness measures as Vickers, Brinell and Meyer hardness are discussed with respect to their physical interpretation. Meyer hardness is found to be best suited as a measure of plastic properties. The outline of a depth sensing nanoindentation experiment is described, and particular emphasis is given to the correct deduction of the contact area from indenter penetration data. Experimen...

In this paper, the mechanical response and deformation behavior of anodic aluminum oxide (AAO) were investigated using experimental nanoindentation and Vickers hardness tests. The results showed the contact angle for the nanoporous AAO specimen was 105 and the specimen exhibited hydrophobic behavior. The hardness and the fracture strength of AAO were discussed and a three-dimensional finite ele...

A low magnetic Zr-1Mo alloy was fabricated by a powder bed fusion (PBF) process using a fiber laser. The microstructure, surface morphology, and pore distribution of the as-built Zr-1Mo alloy were observed. Its magnetic susceptibility and Vickers hardness were evaluated by magnetic susceptibility balance and a microindentation tester, respectively. The as-built Zr-1Mo alloy mainly consisted of ...

The ability of staining slurries containing silver and/or potassium compounds to enhance the mechanical properties of a leucite-reinforced glass ceramic (IPS Empress CAD) was investigated by measuring the Vickers hardness, median crack length, toughness, and compressive residual stress of specimens. A staining slurry containing potassium ions was found to increase the toughness of IPS specimens...

The mechanical properties of a new Fe41Co7Cr15Mo14Y2C15B6 bulk glassy alloy were studied by impact bending, compression, and hardness tests carried out at room temperature. The compressive fracture strength, elastic strain to fracture, Young’s modulus and Vickers hardness were measured to be 3.5 GPa, 1.5%, 265 GPa, and 1253 kg mm, respectively. The fracture mode of the glassy alloy under uniaxi...