© 2012 IBRACON This paper aims to present the experimental results involving the use of nanoindentation measurements and prediction of macroscale elastic properties of high performance cementitious composites (HPCC). The elastic properties of HPCC mixture were evaluated at different length scales by nanoindentation (microscale), and elastic moduli and compressive strength tests (macroscale). Th...

The strength of Ultra-High Performance Concrete (UHPC) can be sensitively affected by the curing method used. However, in contrast to the precast plant production of UHPC where a standard high-temperature steam curing is available, an optimum curing condition is rarely realized with cast-in-place UHPC. Therefore, the trend of the compressive strength development of UHPC was experimentally inves...

Bricks manufactured from dried sludge collected from an industrial wastewater treatment plant were investigated. Results of tests indicated that the sludge proportion and the firing temperature were the two key factors determining the brick quality. Increasing the sludge content results in a decrease of brick shrinkage, water absorption, and compressive strength. Results also showed that the br...

Uniaxial and triaxial compression tests on steel fibre reinforced shotcrete (SFRS) have been used to quantify the elastic–plastic response behaviour for both the peak and post-peak regions. The laboratory tests were conducted with a servo-controlled testing machine to obtain complete stress–strain curves. The test results include unconfined and triaxial compressive strengths, shear strengths an...

polymethyl methacrylate (pmma), widely used as a prosthodontic base, has many disadvantages, including a high thermal expansion coefficient and low thermal conductivity, a low elasticity coefficient, low impact strength and low resistance to fatigue. this study aimed to make an in vitro comparison of the thermal conductivity, compressive strength, and tensile strength of the acrylic base of com...

agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. a mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. in each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...

conventional investigations on the behavior of reinforced and unreinforced soils are often investigated at the failure point. in this paper, a new concept of comparison of the behavior of reinforced and unreinforced soil by estimating the strength and strength ratio (deviatoric stress of reinforced sample to unreinforced sample) at various strain levels is proposed. a comprehensive set of labor...

cementing is an essential part of every drilling operation. protection of the wellbore from formation fluid invasion is one of the primary tasks of a cement job. failure in this task results in catastrophic events, such as blow outs. hence, in order to save the well and avoid risky and operationally difficult remedial cementing, slurry must be optimized to be resistant against gas migration phe...

concrete is the most common material used to line irrigation canals and must maintain its durability for the lifetime of the canal. compressive strength has been used as an index to control the quality of concrete; concrete that remains durable under freeze-thaw conditions is that with high compressive strength. research has shown that concrete linings can show suitable compressive strength in ...