Previous experiments have shown that tritium is produced in deuterated titanium. To better define the phenomenon a series of tests have been performed using various metals and alloys and different deuterating conditions. Sheets and shavings of titanium, zirconium, hafnium, tantalum, Zircaloy 2 and Ti-Zr 50% alloy have been tested. A statistical analysis of the tritium production shows that sign...

The refractive index of nanoparticles dispersed in water is measured, using the total internal reflection method. The critical angle is determined by the disappearance of diffraction orders from a metal grating. The investigated nanoparticles are titanium dioxide (anatase phase), (35 nm diameter), zinc oxide, (<50 nm diameter), zirconium dioxide, (<100 nm diameter). The refractive index is meas...

In this study, a high-performance TixZrySizO flash memory is demonstrated using a sol-gel spin-coating method and formed under a low annealing temperature. The high-efficiency charge storage layer is formed by depositing a well-mixed solution of titanium tetrachloride, silicon tetrachloride, and zirconium tetrachloride, followed by 60 s of annealing at 600°C. The flash memory exhibits a notewor...

The physical vapor deposition process of serial bideposition is adapted to the fabrication of uniaxial optical coatings. During the coating process the vapor impinges at an angle of incidence of about 70 on to the substrate, and a stepwise axial rotation with 90 increments causes a columnar structure to grow normal to the substrate. Symmetry considerations that follow from the choice of 90 for ...

PURPOSE The aim of this work is to evaluate different types of materials used for making implant abutments, by means of an in vitro study and a review of the literature, in order to identify the indications for a better choice of an implant-supported restoration in the anterior section. MATERIALS AND METHODS 5 implant abutments were tested in a random order in the superior anterior maxilla of...

OBJECTIVE The purpose of this study was to determine the fracture strength of zirconium implant abutments and the torque required to unfasten the retaining screw before and after applying cyclic loading to the implant-abutment assembly. The dynamic behavior and stress distribution pattern of zirconium abutments were also evaluated. METHODS AND MATERIALS Static and cyclic loading of 7 XiVE imp...

Titanium and Zircaloy-4 dissimilar alloys were brazed with a zirconium-titanium-copper-nickel amorphous filler alloy, the resulting joint structures as well their corrosion properties examined. The microstructure of joints was investigated according to brazing holding time at 850 °C, property analyzed by potentiodynamic polarization. During brazing, produced diffusion-induced isothermal solidif...

This work presents the nanoindentation and XPS results of a newly-developed biomaterial of titanium TNZ alloy after different surface treatments. The investigations were performed on the samples AR (as received), EP (after a standard electropolishing) and MEP (after magnetoelectropolishing). The electropolishing processes, both EP and MEP, were conducted in the same proprietary electrolyte base...

The treatment of titanium alkoxides with 1,5-pentanedioxime or 2,5-hexanedioxime resulted in the formation of complexes [{TiL(OR)2}2] in which the dioximate ligands (L) bridge a dimeric Ti2(μ2-OR)2 unit. The structures of the complexes were determined by single-crystal structure analysis, ESI mass spectrometry, and 1D and 2D solution NMR spectroscopy. In contrast, the treatment of titanium alko...