Ultrahigh temperature ceramics (UHTCs) such as diborides of zirconium, hafnium tantalum and their composites are considered to be the candidate materials for thermal protection systems of hypersonic vehicles due to their exceptional combination of physical, chemical and mechanical properties. A composite of ZrB2-TiB2 is expected to have better properties. In this study, an attempt has been made...

The improvement of titanium diboride (TiB2) coatings over the molybdenum substrate was investigated by comparing the electrochemical techniques of continuous current plating (CCP) and periodically interrupted current (PIC). The solvent used was a eutectic Flinak mixture (LiF–NaF– KF, 46.5:11.5:42molar ratio) with solutes K2TiF6 andKBF4 with the electrochemically-active components in themolar ra...

Abstract High as-cast strength die-cast AlSi9Cu2Mg alloy was achieved with industrially acceptable ductility, via the addition of titanium diboride nanoparticles. The main intermetallic compounds in were identified as θ–Al2Cu and Q–Al5Cu2Mg8Si6 phases. Fe-rich compound formed present a high Mn/Fe ratio 3:1 determined BCC structured α–Al15(Fe,Mn)3Si2 phase lattice parameter a = 1.2702 nm, had hi...

Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...

Titanium diboride is one of the candidate materials for high temperature applications and also for control rod elements in high temperature reactors. This paper presents the experimental data on the composites of B4 C-nano TiB2 that were synthesized successfully by co-precipitation methodat 1523K. Titanium tetraisopropanol, boron carbide, isopropanol and triton x-100were used as the precursor m...