in this study, a simulation of tire–soil interaction model was considered with special view to two-dimensional (2-d) fem model of carcass. coefficients of mechanical behavior of silty-loam soil were accurately measured to obtain an effective simulation. the results of simulation which was implemented in matlab7, showed that the radial-ply tire had greater tractive efficiency than bias tire at t...

In this study, a low degree-of-freedom mechanical model of a rolling tire is constructed, in which the lateral deformation of the contact patch and tire carcass is considered. The so-called delayed contact patch model is implemented and combined with a simple tire carcass model. The interaction between the contact patch and the carcass together with the lateral mode of the attached suspension s...

Often when vehicles interact with roadside hardware like guardrails, bridge rails and curbs, the interaction between the roadside hardware and the tire causes the tire to lose its air seal and "blow-out". Once the seal between the rim and rubber tire is lost, the tire deflates. The behavior of the deflated tire is much different than the behavior of an inflated tire such that when this behavior...

Tire dust is a significant pollutant, especially as a source of zinc in the urban environment. This study characterizes the morphology and chemical composition of heavy metal particles embedded in tire dust and traffic-related materials (brake dust, yellow paint, and tire tread) as measured by a field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (F...

One of the great enemies of rubber compounds is heat. Heat will cause chemical and physical degradation of vulcanized rubber as well as a considerable loss in its strength. A major source of heat generation in a tire is due to internal friction resulting from the viscoelastic deformation of the tire as it rolls along the road. Another source of heat generation in a tire is due to its contact fr...

This article presents methods for estimating lateral vehicle velocity and tire cornering stiffness, which are key parameters in vehicle dynamics control, using lateral tire force measurements. Lateral tire forces acting on each tire are directly measured by load-sensing hub bearings that were invented and further developed by NSK Ltd. For estimating the lateral vehicle velocity, tire force mode...

The interaction between the tire and road has long been of interest for vehicle dynamic simulation. A planar tire model is developed to capture the tire circumferential displacements and calculate the spindle force according to the tire shape. The tire is discretized into segments and Hamilton’s principle is used to derive the model mathematical expression. It is shown that the static constrain...

ABSTRACT: The objective of this paper is to investigate a class of general tire models that provides results suitable for usage in vehicle dynamics. Tire models currently used for vehicle dynamic analyses are overly simplistic (springs, a spring and damper combination or semi-elastic substance) or based on curve fits of experimental data. In contrast, the tire models used by major tire companie...

excessive production and stockpile of scrap tires cause some environmental and sanitary risks throughout the world. to manage these materials, possible use of soil-tire mixtures has been recently propounded in civil engineering projects. a few studies previously have been conducted to evaluate behavior of clay-tire mixtures, while swelling properties, consolidation and settlement characteristic...