Abstract: TiO2 thin films were prepared by spray pyrolysis technique at a substrate temperature of 350C under optimum conditions. Films have uniform thickness varying from 0.3–6 μm and good adhesion to substrate. The films were characterized by XRD, SEM and EDAX measurements. XRD profile shows poly crystalline nature of films. As deposited films have anatase phase. Transformation from anatase t...

Fabrication of three-dimensional TiO2 films on Ti substrates is one important strategy to obtain efficient electrodes for energy conversion and environmental applications. In this work, we found that hierarchical porous TiO2 film can be prepared by treating H2O2 pre-oxidized Ti substrate in TiCl3 solution followed by calcinations. The formation process is a combination of the corrosion of Ti su...

n-BiVO4 is a promising semiconductor material for photoelectrochemical water oxidation. Although most thin-film syntheses yield discontinuous BiVO4 layers, back reduction of photo-oxidized products on the conductive substrate has never been considered as a possible energy loss mechanism in the material. We report that a 15 s electrodeposition of amorphous TiO2 (a-TiO2) on W:BiVO4/F:SnO2 blocks ...

Detection of H2O2 is important for the applications in environmental protection, pharmaceutical industries, food production, and clinical control. Current colorimetric assay of H2O2 based on enzyme or nanomaterials always needs TMB or other peroxidase substrate as coloration species. Furthermore, the corresponding response time including incubation process is in order of minute. In this study, ...

The photochemical properties of TiO2 films supported on BaTiO3 were investigated to test the hypothesis that dipolar fields from a ferroelectric substrate would affect the reactivity of the supported film. Photochemical reaction products were formed on the TiO2 surface in patterns that correspond to the underlying domain structure of BaTiO3. As the film thickness increases from 10 to 100 nm, th...

This research study the application of the immobilized TiO2 layer and Cu-TiO2 layer on graphite substrate as a negative electrode or anode for Li-ion battery. The titania layer was produced through chemical bath deposition method, meanwhile Cu particles were deposited electrochemically. A material can be used as an electrode as it has capability to intercalates Li ions into its crystal structur...

A new turbulent, premixed, stagnation swirl flame (SSF) is used to synthesize titanium dioxide (TiO2) nanopowders. Synthesis conditions under two flame modes, i.e., burnerand substrate-stabilized SSF, are investigated, for the same equivalence ratio, but different inert-dilution ratios. The particles (collected on the substrate) have high anatase purity, with mean diameters of 5–10 nm, determin...

in order to fabricate transparent tio2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from ti substrate by a re-anodization method. the membranes are transferred on fto glass by two different methods. at the first one, 100mm ti-isopropoxide is used to make tio2 nanoparticles for adhering tio2 nanotube membranes to fto and in the second one a commercial ti...

In the present study, two new organic dyes based on indigo were prepared and used as sensitizers in dye-sensitized solar cells. To this end, indoxyl was utilized as the electron donor and cyanoacrylic acid as the electron acceptor anchoring groups. These dyes together with their corresponding intermediates were purified and characterized by FTIR, 1HNMR, 13CNMR, elemental analysis and UV-Visible...

Vanadium dioxide is a key material for thermochromic smart windows that can respond to environmental temperatures tomodulate near infrared irradiation froma transparent state at low-temperature to an opaque state at high-temperature while maintaining the visible transmittance. This paper reports a novel VO2/FTO/ glass multi-layered structure, which shows promising optical properties for applica...