In this paper, silica gel supported titanium dioxide particles (TiO2/SiO2) prepared by acid-catalyzed sol–gel method was as photocatalyst in the degradation of acid orange 7 (AO7) in water under visible light irradiation. The particles were characterized by X-ray diffraction, BET specific surface area determination, and point of zero charge measurement. The supported catalyst had large surface ...

Planar waveguides of SiO2:TiO2 (multilayer structure) and SiO2:CeO2 (thick layer) were prepared onto commercial glass substrates using a sol-gel technique combined with dip-coating. These glassy coatings were structural characterised by Transmission Electron Microscopy (TEM) Energy Dispersive X-ray analysis and by Confocal Microscopy. Thicknesses of 1230 nm and 4,15 μm and refractive indices of...

Even with rigorous environmental regulations, phenol still is a major contaminant. One possible solution is the use of heterogeneous photocatalysis due to low chemical addition, feasibility and reliability to be implanted on cost-effective industrial process. TiO2 is the most employed photocatalyst because of its favorable (photo) chemical properties and ZnO is considered one of the best altern...

in this work, tio2 /sio2 (pure anatase), and tio2 /sio2 (anatase/rutile) nano-photocatalysts are prepared by using sol-gel method and control of acidity. the particles size is calculated using scheerer, s equation and is estimated to be around 7-15 nm. in order to improve the photocatalytic activity of tio2 /sio2 ,1% (wt) platinum particles are loaded on both catalysts using photoreductive meth...

Transparent dielectric layers with varying compositions of TiO2 and SiO2, and ITO are deposited on sapphire and Si substrates by using an RF sputter system. Inductively coupled plasma (ICP) reactive ion etching (RIE) of the ITO hard mask is examined under H2, CH4, and Cl2 chemical environments. The slope of the sidewall and the etch residue on the sidewall of the ITO hard mask are controlled by...

OBJECTIVE In orthopaedics, novel bioactive composites are largely needed to improve the synthetic achievement of the implants. In this work, semiconducting metal oxides such as SiO2, TiO2, and ZrO2 particles (Ps) were used individually and in different ratios to obtain different biphasic composites. The immunotoxicity of these composites was tested to inspect the potential toxicity prior to the...

Conventional supported Pt catalysts have often been prepared by loading Pt onto commercial supports, such as SiO2, TiO2, Al2O3, and carbon. These catalysts usually have simple metal-support (i.e., Pt-SiO2) interfaces. To tune the catalytic performance of supported Pt catalysts, it is desirable to modify the metal-support interfaces by incorporating an oxide additive into the catalyst formula. H...

The self-cleaning of glasses can be realized by coating the photoinduced super-hydrophilic nanoporous thin films based on TiO2 photocatalysts via sol–gel route. In this study, a new method to enhance the photocatalytic activity of TiO2 thin films direct coated on the glass was developed by doping SiO2 in the films. The effects of post-annealing and the SiO2 content of TiO2 film on the photocata...

A novel process was developed for direct synthesis and in situ coating of flame-made nanostructured particles in one step. Rutile TiO2 particles made by flame spray pyrolysis (FSP) were coated in a single step with SiO2 layers in an enclosed flame reactor. This in situ particle coating was accomplished by a hollow ring delivering hexamethyldisiloxane (HMDSO) vapor (precursor to SiO2) through mu...