The biosorption of nickel(II) ions by deactivated protonated yeast was investigated with respect to the initial pH and initial metal ion concentration. The kinetics of sorption was also followed based on the amounts of metal sorbed at various time intervals for different yeast doses. The equilibrium data could be fitted by the Langmuir isotherm model. The adsorption capacity was pH dependent wi...

Adsorption is considered to be one of the most effective technologies widely used in global environmental protection areas. Modeling of experimental adsorption isotherm data is an essential way for predicting the mechanisms of adsorption, which will lead to an improvement in the area of adsorption science. In this paper, we employed three isotherm models, namely: Langmuir, Freundlich, and Dubin...

We developed a novel biosorbent based on zirconium-modified pomegranate peel (SPP@Zr) for efficient arsenic (As(III)) removal from water. SEM, EDX, XRD, and FTIR were used to characterize the prepared biosorbent. The batch adsorption method was evaluate viability of biosorbents As(III) EDX analysis saponified peels (SPP) before after Zr (IV) loading demonstrated that ion exchange preferred meta...

Activated carbon prepared from neem oilcake, by pyrolysis accompanied with microwave oven activation is evaluated for the adsorption of Cd(II) and Ni(II) from wastewater. Parameters such as pH, agitation time, metal ion concentration and adsorbent dose are studied. The percent removal increased with pH from 2.0 to 7.0. The adsorption data fit well with Langmuir, Freundlich and Temkin isotherm m...

In this study Ceramium virgatum has been characterized and used for the removal of cadmium and lead from aqueous solutions. The effect of pH, adsorbent dosage, contact time and temperature on adsorption process was studied in batch experiments. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by C. virgatum biomass. The adsorption data can be we...

This research article deals with an electrosynthesis of hydrous titanium dioxide by anodic dissolution of titanium sacrificial anodes and their application for the adsorption of manganese from aqueous solution. Titanium sheet was used as the sacrificial anode and galvanized iron sheet was used as the cathode. The optimization of different experimental parameters like initial ion concentration, ...

The present work is concerned to remove Cu using the biosorption potential of fungal biomass Aspergillus oryzae. The dry fungal biomass was used to optimize various parameters such as contact time, initial metal ion concentration, pH, biomass loading etc. A maximum of 91% Copper removal was observed in 5 mg/L initial Copper metal ion concentration using dry Aspergillus oryzae biomass. The perce...

a chelating resin is prepared by condensation polymerization of aniline with formaldehyde andcharacterized by ft-ir, elemental analysis and studied for the preconcentration and determination of traceplatinum ion from environmental water sample using inductively coupled plasma-atomic emission spectroscopy(icp-aes). the optimum ph value for sorption of the metal ions was 5. the maximum adsorption...

Batch experiments were conducted to study the adsorption behaviors of lead ion (Pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (BET). The adsorption removal of Pb2+ by the three ferrihydrites (called FH-1, FH-2 and FH-3, respectively) were compared, and FH-3 shows fast adsorption kinetics as well as hig...

Adsorption of ammonia from anaerobic digester effluent by magnetically modified zeolite (MMZ) has been investigated using a batch technique and comparison of adsorption isotherm equations. Adsorption isotherm models were utilized to describe the equilibrium isotherms and the isotherm constants were calculated. The sorption of ammonia follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) m...