Under long-term loading creep conditions, mineralized biological tissues like bone are expected to behave in a similar manner to synthetic composites where the creeping matrix sheds load to the elastic reinforcement as creep deformation progresses. To study this mechanism in biological composites, creep experiments were performed at 37 °C on bovine compact bone and dentin. Static compressive st...

High, sustained loads in masonry cause time-dependent deformations, which can lead to failure of the construction. This phenomenon mostly occurs in high constructions, such as historical towers, where the dead load imposes significant stresses on the base of the tower [4]. As knowledge and experimental data are lacking to describe this time-dependent behavior in historical masonry, a research p...

De Zee, M., F. Bojsen-Møller, and M. Voigt. Dynamic viscoelastic behavior of lower extremity tendons during simulated running. J Appl Physiol 89: 1352–1359, 2000.—The aim of this project was to see whether the tendon would show creep during long-term dynamic loading (here referred to as dynamic creep). Pig tendons were loaded by a materialtesting machine with a human Achilles tendon force profi...

Superior creep strength of a heat resistant AX52 magnesium alloy is ascribed to the grain boundary eutectic Al2Ca phase covering the primary -Mg grains. The eutectic phase is stable in morphology at temperatures below 473K, while it collapses during long term exposure at temperatures higher than 473K. The microstructural change of the alloy during high temperature exposure is characterized by t...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...

The creep and wear behaviour of highly cross-linked polyethylene and standard polyethylene liners were examined in a prospective, double-blind randomised, controlled trial using radiostereometric analysis. We randomised 54 patients to receive hip replacements with either highly cross-linked polyethylene or standard liners and determined the three-dimensional penetration of the liners over three...

This paper discusses the long-term behavior of a series of highly-loaded, spun concrete pole specimens prestressed with carbon fiber-reinforced polymer (CFRP) tendons, which were subjected to outdoor four-point bending creep tests since 1996 in the frame of collaboration with the Swiss precast concrete producer, SACAC (Società Anonima Cementi Armati Centrifugati). The 2 m span cylindrical beams...

Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...

The creep and recovery of 5% carboxyl-terminated butadiene acrylonitrile (CTBN) modified epoxy shape memory polymers (SMP) was studied. The results were compared with those for the unmodified epoxy SMP. The glass transition temperatures (Tg) were determined using Advanced Rheometric Expansion System (ARES). The creep behavior of the unmodified epoxy and 5wt.% CTBN modified epoxy SMP were studie...