The influence of laser processing parameters on mechanical properties and microstructure of pure titanium models made by selective laser melting is investigated. The density of the models can reach higher than 95% under proper conditions. Although the tensile strength test shows results comparable to the wrought material, the impact and torsional fatigue strengths are low because of porosity an...

By using the mechanical property tester, conductivity tester, DSC and optical microscope, the effects of the solid solution temperature, water temperature, transfer time and delay time of quenching on the mechanical properties and conductivity of 7475 alloy were investigated, respectively. The results showed that all properties are satisfied at the solid solution temperature of 460°C­480°C whil...

In this paper, the flexural behavior of High-performance Fiber-Reinforced Cementitious Composite (HPFRCC) has been investigated, especially focusing on the localization of cracks, which significantly governs the flexural behavior of HPFRCC members. From four points bending tests with HPFRCC members, it was observed that almost evenly distributed cracks formed gradually, followed by a localized ...

Increasing of strain rate during forming of semi products or products is one of the ways of production intensification. Therefore an attention is paid to the study of the influence of the strain rate on the material behaviour in the deformation process, but also on the methodology of evaluation of formability at increased strain rates (including impact) 1,2 . In general, it applies that increas...

The introduction of femtosecond laser assisted cataract surgery (FLACS) is a paradigm changing approach in cataract surgery, the most commonly performed surgical procedure. FLACS has the potential to optimize the creation of an anterior lens capsulotomy, a critical step in accessing the cataractous lens. The merits of using a laser instead of a manual approach include a potentially more circula...

In order to expand the application range of laser welding and improve weld quality, an extra pulse current was used to aid laser-welded 2219 aluminum alloy, and the effects of pulse current parameters on the weld microstructure and mechanical properties were investigated. The effect mechanisms of the pulse current interactions with the weld pool were evaluated. The results indicated that the co...

Using density functional theory calculations, we have investigated the effects of biaxial tensile strain on the electronic and magnetic properties of partially hydrogenated graphene (PHG) structures. Our study demonstrates that PHG configuration with hexagon vacancies is more energetically favorable than several other types of PHG configurations. In addition, an appropriate biaxial tensile stra...

The tensile strengths of 12 commercially available brands of epidural catheters were assessed using an Instron material testing device. The mean values of the tensile strengths ranged from 1.89 to 3.74 kilogram force. The extent of catheter occlusion due to kinking was also studied using an in vitro apparatus designed to simulate drug delivery at various degrees of flow restriction. It was dete...

An extensive literature covering the last 50 years has shown that all structural and bridge steels are potentially susceptible to strain aging. The most damage is done by cold strain itself. Strains in the 5% to 18% range can typically increase yield strength by 70% and typically increase tensile strength by 35%. Over the same strain range, tensile elongation will typically decrease by 30%. The...