نتایج جستجو برای: tenon joint showed a highest mechanical strength moreover
تعداد نتایج: 13679892 فیلتر نتایج به سال:
Friction Stir Welding is one of the solid-state processes and today it has been used to join different types of materials. Friction stir welding does not have many problems and limitations due to melting and solidification of weld metal and by controlling its variables, the microstructure and desired mechanical properties can be achieved at the joint. Recently, in most industrial areas, due t...
Friction Stir Welding is one of the solid-state processes and today it has been used to join different types of materials. Friction stir welding does not have many problems and limitations due to melting and solidification of weld metal and by controlling its variables, the microstructure and desired mechanical properties can be achieved at the joint. Recently, in most industrial areas, due t...
The current work was carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials; the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steels 310. Of the two joints involved, this paper describes the choice of welding consumables for the...
the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...
Present study focuses on the micro-structural and mechanical behavior effect of friction time for similar (AISI 316-AISI 316 and AISI 304-AISI 304) and dissimilar (AISI 304-AISI 316) joint during continuous drive friction welding. The welding carried out with different friction time: 6.5, 8.5 and 10 s while kept all other conditions constant. The effect of that time on the strength, structural ...
this study evaluated the effects of end to end joint types of athel stripes at three level (end to end basic, end to end mitrated and end to end half lap joint) used in core layer veneered with three wood species (fir, beech and oak) and glued with three different ratio of melamine formaldehyde/urea formaldehyde resin (0:100, 25:75 and 50:50) on the bending strengths of bloakboard. according to...
Due to their superior properties such as high specific strength, high creep resistance and high strength at elevated temperatures, aluminum composites reinforced with alumina nano particles are widely used for advanced purposes such as aerospace and auto industries. Lack of an appropriate welding process limits their applications. Transient liquid phase (TLP) bonding is one of the state-of-the...
The influence of heat-input and pre-heat treatment on the structure, mechanical and corrosion behaviors of 2205 duplex stainless steel joint by means of GMAW process was the goal of this study. In this regards, the welding process was done using different heat input in the range of 0.6 to 1.4 kJ/mm and different pre-heating treatments in the range of 25 to 100 oC. The microstructural properties...
prior to the design and construction of any fruit harvesting machine it is essential to know the physical and mechanical properties of the trees and of its fruits. an example could be cited as the force needed to overcome. the strength with which the fruit is attached to the stem, in trunk shaker harvesting. in this research the acting forces on the fruit during harvest, including tensile stren...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید