A series of activated carbons were prepared by physical steam gasification under identical experimental conditions to compare the pore development from almond tree pruning chars and walnut shell activated carbons. The results obtained showed that steam gasification yields microporous carbons in both cases, and the rise in temperature causes an increase of the pore volumes of the activated carbo...

Highly microporous bio-based activated carbon fibers (ACFs) were prepared through a simple reactivation method. Sawdust, as the starting material, was liquefied and melt-spun to produce the precursor fibers. Then, the precursor fibers were activated by KOH and reactivated by steam. By varying the conditions of the two activation processes, the formation mechanism of the pore structure was studi...

The boiler drum level control unit is one of the main parameter in the thermal power station. Currently the boiler drum parameters are monitored only by using MATLAB software. There is no automatic control available. In the proposed system the boiler drum parameters such as temperature level, pressure level, water level and Droplet identifier are measured and controlled by using embedded proces...

Abstract Ethanol steam reforming was studied over Ni supported catalysts. The effects of support (Al 2 O 3 , Al –ZnO, and –CeO ), metal loading, catalyst activation method, steam-to-ethanol molar feed ratio were investigated. properties catalysts by N physisorption, TPD-CO X-ray diffraction, temperature programmed reduction. After activity tests, the analyzed TOC analysis. catalytic measurement...

A soil core, obtained from a contaminated field site, contaminated with a mixture of volatile and semivolatile organic compounds (VOC and SVOC) was subjected to air and steam flushing. Removal rates of volatile and semivolatile organic compounds were monitored during flushing. Air flushing removed a significant portion of the VOC present in the soil, but a significant decline in removal rate oc...

PURPOSE To compare PRESS and STEAM MR spectroscopy for assessment of liver fat in human subjects. MATERIALS AND METHODS Single-voxel (20 x 20 x 20 mm) PRESS and STEAM spectra were obtained at 1.5T in 49 human subjects with known or suspected fatty liver disease. PRESS and STEAM sequences were obtained with fixed TR (1500 msec) and different TE (five PRESS spectra between TE 30-70 msec, five S...

[1] Steam explosions, or littoral blasts, generated when pyroclastic flows interact with seawater may be a common, although rarely documented, phenomena. The development of steam explosions rather than passive steam production is related to the rate of thermal energy transfer from hot pyroclasts to water. We conduct a series of laboratory experiments to quantify the heat transfer and steam prod...

In power station practice, work is extracted from expanding steam in three stages namely High Pressure(HP), Intermediate Pressure(IP) and Low Pressure(LP) turbines. During the expansion process in the LP turbine, the steam cools down and at some stages, it nucleates to become a two-phase mixture. It is well-acknowledged in the literature that the nucleating and wet stages in steam turbines are ...

Steam-water flow exists in most geothermal reservoirs where steam-water capillary pressure plays an important role in controlling fluid distribution, transfer of liquid between fracture and matrix, well productivity, and even the reserves. However, it is very difficult to measure steam-water capillary pressure due to the phase transformation and the significant mass transfer between the two pha...

Granular activated carbons (GACS) were developed from hard and soft lignocellulosic byproducts. Three activation strategies were evaluated which employed phosphoric acid, carbon dioxide or steam. A portion of these carbons were also subjected to air oxidation after activation. Uptake of both non-polar and polar, small organic compounds were followed as was the adsorption of copper. Our results ...