The corrosion resistance of type 304L and 316 austenitic stainless steels in 2M H2SO4 at 0-1.5%NaCl concentrations was studied through potentiodynamic polarization technique and optical microscopy analysis. The corrosion rate, pitting potential, passivation potential and surface morphology of both steel where significantly altered by the Clion concentration, alloy composition and metallurgical ...

Precipitation-hardened (PH) stainless steels have been widely used as structural materials and related applications in marine environments, power plants (light-water and pressurized water reactors), and chemical industries because of their good mechanical properties and corrosion resistance at typical service temperatures below 300oC. 17-4 PH (A1S1630) stainless steel (15–17.5 Cr, 3–5 Ni, 3–5 C...

The fatigue crack growth (FCG) behavior was investigated for 17-4 PH stainless steels in three heat-treated conditions, i.e., unaged (Condition A), peak-aged (Condition H900), and overaged (Condition H1150), at temperatures ranging from 300 to 500 C. The high-temperature fatigue crack growth rates (FCGRs) of Condition H1150 were increased with an increase in temperature. However, for Conditions...

In real conditions, austenitic stainless steels solidify in non equilibrium and a two phases microstructure of austenite and ferrite is formed 1 . The aim of this work was to investigate the behaviour of both phases at tensile testing, especially to find out an eventual difference in the relaxation of the deformation energy and the effect of the two phases microstructure in workability. To achi...

Mature passive films (age > 10 s) were grown in aerated saturated calcium hydroxide solution, at the open circuit, on plain steel and alloys with 9% and 22% Cr, as well as austenitic stainless steels. The materials were commercially produced concrete reinforcing steels. Differences in the polarization of the oxygen reduction reaction were evidenced. Oxygen reduction rates at moderate cathodic p...

LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...

In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...

The depth of scientific understanding of martensitic transformations provides a strong foundation for the predictive design of materials exploiting artensitic phenomena. Recent theoretical advances supporting this capability include twoand three-dimensional applications of Landau–Ginzburg heory to martensitic nucleation, and important refinements of multiscale kinetic theory. Accurate control o...