Abstract:   The aims of this research were to investigate the effects of semisolid metal (SSM) processing parameters (i.e., shear rates –times – temperatures combinations) on the primary solidification products and isothermal holding duration, subsequent to cessation of stirring on the secondary solidification of Al-Si (A356) alloy.   The dendrite fragmentation was found to be the governing m...

In the undercooled solidification of pure metals, the dendrite tip velocity has been shown experimentally to have a strong dependence on the intensity of an external magnetic field, exhibiting several maxima and minima. In the experiments conducted in China, the undercooled solidification dynamics of pure Ni was studied using the glass fluxing method. Visual recordings of the progress of solidi...

The directional solidification of the transparent binary alloy succinonitrile-poly(ethylene oxide) was studied in an experiment in which solidification speeds of about 2 mm/sec could be reached without loss of the linear temperature gradient. The low diffusivity of the polymer solute allowed the study of the dynamics of rapid solidification using an optical microscope. For both normal and doubl...

A finite-element simulation of binary alloy solidification based on a single-domain formulation is presented and tested. Resolution of phase change is first checked by comparison with the analytical results of Worster [M.G. Worster, Solidification of an alloy from a cooled boundary, J. Fluid Mech. 167 (1986) 481–501] for purely diffusive solidification. Fluid dynamical processes without phase c...

This paper presents an eddy-current-based technique for imaging the solidification of molten metal inside a metal pipe. This technique is motivated by the fact that the ac (alternating current) impedance seen from a solenoid placed outside the pipe is dependent on the distribution of the solidification inside the pipe provided that the ac frequency is properly chosen and the overall thickness o...

Thin amorphous Ge films on glass substrates are irradiated by single picosecond ~ps! laser pulses and the induced melting and solidification process is followed by means of real-time reflectivity measurements with ps resolution using a setup based on a streak camera. Due to the excellent time resolution achieved in single exposure, the recalescence process occurring upon solidification can be c...

The optimal design of risers for castings has been the subject of numerous investigations and this paper determines the optimal dimensions when Chvorinov’s rule for solidification is obeyed by both the riser and casting and solidification time is the only constraint involved .This problem can be formulated to minimize the riser volume subject to the constraint that the riser solidification time...

Numerous experimental data on the rapid solidification of binary systems exhibit the formation of metastable solid phases with initial (nominal) chemical composition. This fact is explained by complete solute trapping leading to diffusionless (chemically partitionless) solidification at a finite growth velocity of crystals. Special attention is paid to developing a model of rapid solidification...