Some experimental observations on the fluidization characteristics of nanoparticles in the form of agglomerates with magnetic assistance are presented. The nanoagglomerates consist of Degussa Aerosil R974 fumed silica, with a primary particle size of 12 nm. An oscillating AC magnetic field is used to excite large (mm size) permanent magnetic particles mixed in with the nanoparticle agglomerates...

We present results from computational experiments of one-dimensional inhomogeneous granular column. With characteristic properties lying between those of liquids and solids, this class of material consists of assemblies of solid particles which interact via mechanical forces contact and friction and are maintained together by a gravitational field. The system is composed of a vertical column of...

The fluidization characteristics of binary mixtures containing tobacco stem (TS) and cation exchange resin (a substitute for coal) were studied in a rectangular bed with the cross-section area of 0.3 × 0.025 m(2). The presence of herbaceous biomass particles and their unique properties such as low density and high aspect ratio resulted in different fluidization behaviors. Three fluidization vel...

The present work is focused on the study of fluidization behaviour of biomass and sand mixtures in a laboratory scale test set up. The biomass materials used during the experimentation were rice husk, bagasse and sawdust. Two different particle sizes of silica sands were used in forming the mixture. The percentages of biomass in the mixtures were 2%, 5%, 10% and 15% by weight. The minimum fluid...

The onset of surface fluidization of granular material in a vertically vibrated container, z = A cos (ωt), is studied experimentally. Recently, for a column of spheres it has been theoretically found [1] that the particles lose contact if a certain condition for the acceleration amplitude z̈ ≡ Aω/g = f(ω) holds. This result is in disagreement with other findings where the criterion z̈ = z̈crit = c...

A fluidized bed system combining two circulating fluidized bed reactors is proposed and investigated for chemical looping combustion using metal oxides as oxygen carriers. The global solids loop starts in one of the two reactors (primary reactor) where solids are entrained, separated from the gas in a cyclone and sent to the other reactor (secondary reactor) via a fluidized loop seal. From the ...

Nanopowders are applied in a wide range of processes, and their use continues to increase. Fluidization is one of the best techniques available to disperse and process nanoparticles. However, nanoparticles cannot be fluidized individually; they fluidize as very porous agglomerates. Often, it is needed to apply an assisting method, such as vibration or microjets, to obtain proper fluidization. I...

Micro-fluidized bed has aroused much attention due to its low-cost, intensified-process and fast-screening properties. In this paper, a micro-fluidized (15 × 15 mm in cross-section) was designed fabricated with the use of stereolithography printing technique, for investigation bubbles’ hydrodynamics comparison solids (3D-printed particles VS fungal pellets) fluidization characteristics. liquid–...