Terbium doped Y2O3 planar waveguides were fabricated by sol–gel process and dip-coating using yttrium acetate as precursor. Two different doping modes were compared, i.e. introduction in the sol of dispersed Tb3+ions from dissolved Tb(NO3)3, or of nanoparticles of Tb2O3 or [Y2O3:50% Tb] from an alcoholic suspension. The chemical and nanostructural properties were analyzed by infrared spectrosco...

nanosized tio2 particles were prepared by sol–gel method. the tio2 particles were co-deposited with chromium using electrodeposition technique. in investigating of coating surfaces by scanning electron microscope (sem), the results showed that the morphology of the coating surface was changed by adding tio2 nanoparticles to the chromium coating. the corrosion behavior of the coatings was assess...

We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D) electrowetting-on-dielectric (EWOD) devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL) capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm²) than that of conventional di...

Surfactant-templated mesostructured sol–gel films formed by evaporation induced self assembly (EISA) exhibit highly-ordered hexagonal, lamellar, and cubic structures. The steady-state dip-coating configuration allows both the chemistry and the dynamics of the EISA process to be traced in real time because the steps involved in the formation of the mesostructured material are separated both spat...

The inherent reactivity of the Al–Cu alloys is such that their use for structural, marine, and aerospace components and structures would not be possible without prior application of a corrosion resistance system. Historically these corrosion resistance coatings were based on the use of chemicals containing Cr (VI) compounds. Silane coatings are of increasing interest in industry due to th...

In this paper, ZnO thin film is deposited on slide glass substrate using the sol-gel process. Presenting well-defined orientation of ZnO thin films Nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (MEA), de-ionized water and isopropanol alcohol. The annealed ZnO thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....

We report on the fabrication and characterization of thick UV-patternable hybrid sol-gel films by spin coating using a modified sol-gel process. Thick coating of 25 microns with crack-free surface can be produced by one spin coating step. Thick layers of more than 100 μm can be obtained with a multi-coating process. Characterization using different techniques including optical microscope and at...