Fractal metallic dendrites have been drawing more attentions recently, yet they have rarely been explored in electronic printing or packaging applications because of the great challenges in large-scale synthesis and limited understanding in such applications. Here we demonstrate a controllable synthesis of fractal Ag micro-dendrites at the hundred-gram scale. When used as the fillers for isotro...

Different modification routes using fly ash-based calcium silicate (FACS) with starch/sodium stearate were explored to mitigate the negative effect of filler on paper strength and allow for improved filler content. The morphology of the modified fillers and the properties of the filled paper were investigated. The modification route was found to be critical to the amount of starch/sodium steara...

The microstructures and weldability of a brazed joint of 1Cr18Ni9Ti austenitic stainless steel with BNi-2, BNi82CrSiBFe and BMn50NiCuCrCo filler metals in vacuum were investigated. It can be observed that an interdiffusion region existed between the filler metal and the base metal for the brazed joint of Ni-based filler metals. The width of the interdiffusion region was about 10 μm, and the mic...

By employing an idealized model of a polymer network and filler, we have investigated the stress-strain behavior by tuning the filler loading and polymer-filler interaction in a broad range. The simulated results indicate that there actually exists an optimal filler volume fraction (between 23% and 32%) for elastomer reinforcement with attractive polymer-filler interaction. To realize this rein...

Nanocomposite inks composed of nickel–silver core–shell and silver nanoparticles (NPs) can combine the advantages lower cost, high conductivity, low-temperature sintering processes, which have attracted much attention in development materials for printed flexible electronics. In this context, present paper, we report process preparation nanocomposite ink containing nanoparticles, as main filler...

An epoxy resin was nanomodified with in-situ generated silver nanoparticles (Ag) and with various amounts of carbon black (CB) and carbon nanofibers (NF), in order to increase the electrical conductivity of the matrix. Differential scanning calorimetry tests revealed how the addition of both CB and NF led to a slight decrease of the glass transition temperature of the material, while electron m...

Filler –matrix coupling determines, to a large extent, the mechanical strength and clinical longevity of dental composites. Incorporation of filler into resin matrix greatly influences and improves material properties provided that filler particles are bonded to polymer matrix or otherwise it may actually weaken the resin. Benefits of filler content presence are increased hardness, strength, ra...

Polyvinylidene fluoride (PVDF) composites filled with in situ thermally reduced graphene oxide (TRG) and silver nanowire (AgNW) were prepared using solution mixing followed by coagulation and thermal hot pressing. Binary TRG/PVDF nanocomposites exhibited small percolation threshold of 0.12 vol % and low electrical conductivity of approximately 10(-7) S/cm. Hybridization of TRGs with AgNWs led t...

The use of fillers in paper products can provide cost and energy savings, improved paper properties, increased productivities, and specifically desired paper functionalities. There are many problems associated with the use of fillers, such as unsuitability of calcium carbonate fillers in acid papermaking, negative effects of filler loading on paper strength, sizing, and retention, and tendencie...

Welding of nanomaterials is a promising technique for constructing nanodevices with robust mechanical properties. To date, fabrication of these devices is limited because of difficulties in restricting damage to the nanomaterials during the welding process. In this work, by utilizing very low fluence (∼900 μJ cm(-2)) femtosecond (fs) laser irradiation, we have produced a metallic interconnectio...