This paper examines the compressive strength of sodium silicate bonded cores for aluminum casting with different additives. Various materials are used as additives among which it is found that 5% sand size bauxite has the best effect on both gas strength and de-coring 98.5% silica content sand with 70-90 AFS No. with 4% sodium silicate is used. The results indicate that although very good colla...

In the present study, pressure drop have been measured for narrow sized silica sand slurry and bimodal slurry consisting of narrow sized silica sand and fly ash as fine particles in different proportions keeping the overall efflux concentration same using a pilot plant test loop. The pressure drop has been measured over a length of 4.0 m in 50 mm NB diameter pipe line for fully developed flow. ...

This study presents an experimental investigation on self-compacting concrete (SCC) with fine aggregate (sand) replacement of a Quarry Dust (QD) (0%, 25%, 50%, 75%, 100%) and addition of mineral admixtures like Fly Ash (FA) and Silica Fume (SF) & chemical admixtures like super plasticizers (SP). After each mix preparation, 45 cubes specimens and 45 cylinders specimens are cast and cured. The sp...

This study investigated occupational exposure to silica dust of 48 workers in stone cutting, glass making, ceramic, and sand blasting plants in the north of Iran. Samples were collected from the breathing zone using a personal sampling pump and a size-selective cyclone. Sample filters and blanks were analysed using infrared spectroscopy. The mean sampling period was 4.83 h. Mean exposure of wor...

Reclamation of used moulding and core sands is defined as a treatment of waste refractory materials allowing to recover at least one component of properties similar to the properties of the new component and to reuse it for casting moulds and core production. In traditional technologies of casting moulds and core production on the basis of high-silica sands with binding agent addition, the recl...

Abstract Self compacting concrete (SCC) is a new construction material in the world. The aim of this research is to construct self compacting concrete with high compressive strength using combination of nano silica and micro silica. For this purpose, nano silica, micro silica, Portland cement type 2, superplasticizer (SP), and gravel and sand have been used. Three different groups of samples wi...

The main objective of this research is to investigate the effect of dewaxing and burnout temperature on the quality of copper alloy casting produced by a low cost block mold that has been developed. In the molding process, two types of silica sand which contains 97.9% silica (SiO2) and 97.2% silica have been used as a refractory material with POP served as a binder. Several mold formulations co...

Liquefaction is one of the most important and complex topics in geotechnical earthquake engineering. In recent years, passive site stabilization method has been proposed for non-disruptive mitigation of liquefaction risk at developed sites susceptible to liquefaction using colloidal nano-silica stabilizer. In this research, 4 box models were used to investigate the ability to uniformly deliver ...