The problem of forming defects in green parts during compaction and ejection has become more prevalent as parts producers have started to use higher compaction pressures in an effort to achieve high density, high performance P/M steels. In this review, several nondestructive inspection methods are evaluated, with the aim of identifying those, which are practical for detecting defects as early i...

To accurately describe the mechanical properties of aluminium alloy sheet during deformation, an inverse identification was presented to deal with material parameters from the popular punch stretch test. In the identification procedure, the optimization strategy combines finite element method (FEM), Latin hypercube sampling (LHS), Kriging model and multi-island genetic algorithm (MIGA). The pro...

Introduction The main function of acrylic bone cement is to transfer loads from the prosthesis to the cancellous bone or increase the load carrying capacity of the surgical prosthesis. If the imposed stresses are greater than the load carrying capability, then cement fracture may occur resulting in failure of the joint replacement. The fracture of the cement mantle and subsequent premature loos...

The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...

BACKGROUND In vivo reflectance confocal microscopy (RCM) is a promising non-invasive skin imaging technique that could facilitate early diagnosis of basal cell carcinoma (BCC) instead of routine punch biopsies. However, the clinical value and utility of RCM vs. a punch biopsy in diagnosing and subtyping BCC is unknown. OBJECTIVE To assess diagnostic accuracy of RCM vs. punch biopsy for diagno...

The aim of this paper is to fabricate micro-gears via laser shock punching with Spitlight 2000 Nd-YAG Laser, and to discuss effects of process parameters namely laser energy, soft punch properties and blank-holder on the quality of micro-gears deeply. Results show that dimensional accuracy is the best shocked at 1690 mJ. Tensile fracture instead of shear fracture is the main fracture mode under...

The paper reviews experimental evidence on the size effect caused by energy release due to fracture growth during brittle failures of concrete structures. The experimental evidence has by now become quite extensive. The size effect is verified for diagonal shear failure and torsional failure of longitudinally reinforced beams without stirrups, punching shear failure of slabs, pull-out failures ...

series of undrained monotonic triaxial tests and cone penetration tests were conducted on loose silty sand samples to study correlation between undrained shear strength of silty sands (sus) and piezocone test results. cpt tests were conducted at 27 silty sand samples in calibration chamber. the results indicate that, in low percent of silt (0-30%), as the silt content increases, the undrained s...