Any voluntary motion of the body causes an internal perturbation of balance. Load transfer during manual material handling may increase these perturbations. This study investigates effects of stance condition on postural control during lifting. Nineteen healthy subjects repeatedly lifted and lowered a load between a desk and a shelf. The base of support was varied between parallel and step stan...

Failure modes in recent earthquakes on lightly reinforced shear walls includes rebar fracture and out of plane buckling of its boundary elements. In latest edition of ACI 318 and also latest amendment of NZS 3101-2006 to avoid rebar fracture in boundary elements, the minimum reinforcement ratio for shear walls is increased. This experimental study investigates that rather than increasing reinfo...

This paper investigates the distribution of principal strain by micro mechanical measurement of concrete axial strain in Reinforced Cement Concrete (RCC) moderate deep beams across its width and depths for various span-to-depth ratios. A complete shear deformational behavior along with load-deflection response, crack patterns and modes of failure were studied experimentally. Twelve beams were t...

Abstract To explore in-plane shear failure mode of cross-laminated timber (CLT) panel, this paper carried out relevant research work from the perspective stress analysis and combined with crack morphology specimen after planar shear. In study, load–displacement curve hemlock [ Tsuga canadensis (L.) Carrière] CLT was obtained by a three-point bending test or an improved test, vertical layer azim...

This paper is concerned with the effect of pure shear on the reflection from a plane boundary of infinitesimal plane waves propagating in a half-space of incompressible isotropic elastic material. For a special class of constitutive laws it is shown that an incident plane harmonic wave propagating in the considered plane gives rise to a surface wave in addition to a reflected wave (with angle o...

This paper presents the effect of centrifugal load in functionally graded (FG) hollow sphere subjected to uniform magnetic field. Analytical solution for stresses and perturbation of the magnetic field vector are determined using the direct method and the power series method. The material stiffness, the magnetic permeability and the density vary continuously across the thickness direction accor...

this paper aims at investigating the effects of weld nugget size and expulsion on the mechanical properties of low carbon steel resistance spot welds using tensile-shear test. mechanical performance of spot welds are described in terms of failure mode, peak load and failure energy obtained from the tensile-shear test. the effects of voids and porosity as well as electrode indentation associated...

The purpose of this report is to provide experimental resuKs for comparison with theoretical analyses of stress diffusion problems. The structures considered consist of plane reinforced sheet which has been assumed not to buckle. Symmetrical loads are applied to the edge booms connected to the sheet by continuous no-slip joints. Attention is concentrated on the stress distribution near the ends...

In this paper a variationally consistent trigonometric shear deformation theory is presented for the free vibration of thick isotropic square and rectangular plate. In this displacement based theory, the in-plane displacement field uses sinusoidal function in terms of thickness coordinate to include the shear deformation effect. The cosine function in terms of thickness coordinate is used in tr...