The manufacture of paper generates significant quantities of waste water; which can have deleterious effects on the receiving waters; therefore there is a need to find a treatment process which can minimize these effects considerably. The raw wastewater from paper and board mills can be potentially very polluting. This paper reveals the results of laboratory experiments using a sequential batch...

The sequencing batch reactor (SBR) installed at Pt Pirie WWTP in South Australia is hydraulically overloaded due to significant ground water infiltration into the sewer network and requires additional treatment capacity. Modifying the operational parameters of Pt Pirie’s SBRs to select for granular sludge (GS) could be a viable means of increasing capacity. Through the use of a pilot-scale SBR ...

The sequencing batch reactor (SBR) process is a sequential suspended growth (activated sludge) process in which all major steps occur in the same tank in sequential order (figure 1). There are two major classifications of SBRs: the intermittent flow (IF) or “true batch reactor,” which employs all the steps in figure 1, and the continuous flow (CF) system, which does not follow these steps. Both...

Two sequencing batch reactors, one with the conventional anoxic and aerobic (AO) process and the other with the multiple AO process, were operated to examine characteristics of biological nitrogen removal, especially of the multiple AO process. The long-term operation showed that the total nitrogen removal percentage of the multiple AO reactor was 38.7% higher than that of the AO reactor. In th...

A modified freeze-thaw method in combination with reverse transcriptase PCR was developed for monitoring gene expression in activated sludge. The sensitivity of the methodology was determined by inoculating non-sterile activated sludge samples with 3-chlorobenzoate-degrading Pseudomonas putida PPO301(pRO103), which contains the catabolic tfdB gene. tfdB mRNA was detected in 10 mg of activated s...

Aerobic granulation of activated sludge was successfully achieved in a full-scale sequencing batch reactor (SBR) with 50,000 m(3) d(-1) for treating a town's wastewater. After operation for 337 days, in this full-scale SBR, aerobic granules with an average SVI30 of 47.1 mL g(-1), diameter of 0.5 mm, and settling velocity of 42 m h(-1) were obtained. Compared to an anaerobic/oxic plug flow (A/O)...

A lab-scale sequencing batch reactor (SBR) and six full-scale wastewater treatment plants (WWTPs) performing enhanced biological phosphorus removal (EBPR) were surveyed. The abundance of Accumulibacter-related organisms in the full-scale plants was investigated using fluorescent in situ hybridization. Accumulibacter-related organisms were present in all of the full-scale EBPR plants, at levels ...

The performance of nitrogen (N) removal was investigated by altering the influent step feeding in a sequencing batch reactor (SBR). optimum condition for analyzed using Technique Order Preference Similarity to Ideal Solution (TOPSIS) with entropy weight method, considering C/N ratio range 1.5 4.5. results showed that SBR multi-step-feeding system achieved high rate 92.7% at three-step mode. Nit...

The ability of a nitrifying sludge to oxidize p-cresol was evaluated in a sequential batch reactor (SBR). p-Cresol was first transformed to p-hydroxybenzaldehyde and p-hydroxybenzoate, which were later mineralized. The specific rates of p-cresol consumption increased throughout the cycles. The bacterial population dynamics were monitored by using denaturing gradient gel electrophoresis (DGGE) a...