Hydrogenation reaction with n-heptane on Pt/Al2O3 catalyst was investigated under the steady state condition in a fixed bed reactor. The catalyst was prepared under a variety of conditions, but the one chosen was non-acidic that is not considered a hydrocracking catalyst. The main objective was to vary the selectivity of n-heptane as a function of reaction variables es...

Bagasse as a real biomass was converted to hydrogen rich gas via catalytic supercritical water gasification process. To find the effect of Cu on selectivity of products, Cu promoted Ni-γAl2O3 catalysts were prepared with 1 to 20wt% Ni and 0.5 to 10wt% Cu loadings via impregnation method. Catalysts were characterized by ICP, BET, XRD, H2 chemisorption and TEM technique as well CHNS analysis was ...

In this study, Mn (III) salen complex was synthesized and immobilized onto the graphene oxide, which is modified by 3-chloropropyltrimethoxy silane. Heterogeneous catalyst was characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis, fourier transform infrared spectra, nitrogen adsorption−desorption isotherm and atomic absorption spectroscopy. The catalyt...

cobalt (ii) chloride was used as a precursor to prepare co 3 o 4 nanotubes in reverse micelles. tween 80 was added as surfactant. the products were characterized by x-ray diffraction (xrd), scanning electron microscopy (sem) and transmission electron microscopy. the diameter of co 3 o 4 nanotubes was about 58 nm and the average length of them was around 261 nm. the study provides a simple and e...

Chemical environment control of the metal nanoparticles (NPs) embedded in nanocrystalline metal-organic frameworks (nMOFs) is useful in controlling the activity and selectivity of catalytic reactions. In this report, organic linkers with two functional groups, sulfonic acid (-SO3H, S) and ammonium (-NH3(+), N), are chosen as strong and weak acidic functionalities, respectively, and then incorpo...

Copper is uniquely active for the electrocatalytic reduction of carbon dioxide (CO2) to products beyond carbon monoxide, such as methane (CH4) and ethylene (C2H4). Therefore, understanding selectivity trends for CO2 electrocatalysis on copper surfaces is critical for developing more efficient catalysts for CO2 conversion to higher order products. Herein, we investigate the electrocatalytic acti...

the oxidative coupling of methane (ocm) performance over na-w-mn/sio2 at elevated pressures has been simulated by adaptive neuro fuzzy inference system (anfis) using reaction data gathered in an isothermal fixed bed microreactor. in the designed neuro fuzzy models, three important parameters such as methane to oxygen ratio, gas hourly space velocity (ghsv), and reaction temperature were conside...

The product distribution of methanol to hydrocarbons conversion over SAPO-34 and ZSM-5 catalysts was studied using thermodynamic equilibrium and Anderson-Schulz-Flory (ASF) distributions. The equilibrium compositions were calculated using constrained Gibbs free energy minimization. The effect of catalyst type was considered by setting upper limits to product carbon number due to sh...