Microbial biofilms that form on metallic surfaces in natural seawater are known to generate efficient oxygen-reducing cathodes. The microbial catalysis of oxygen reduction is a major mechanism of corrosion in marine aerobic environments; it can also be exploited to develop biocathodes for microbial fuel cells. In the latter case, seawater biocathodes have the great advantage of operating in hig...

Cooling systems remove heat from components and industrial equipment. Water cooling, employing natural waters, is typically used for cooling large industrial facilities, such as power plants, factories or refineries. Due to moderate temperatures, cooling water cycles are susceptible to biofouling, inorganic fouling and scaling, which may reduce heat transfer and enhance corrosion. Hypochlorite ...

In this work, an Al coating prepared using the arc spray process was carried out with a corrosion–wear analysis by block-on-ring system. The interaction of corrosion and wear coatings in seawater also investigated. effect different potentials on discussed, structure products were observed SEM. results dynamic potential polarization curves friction coefficient measurements used to clarify behavi...

The Fukushima-Daiichi nuclear accident brought together compromised irradiated fuel and large amounts of seawater in a high radiation field. Based on newly acquired thermochemical data for a series of uranyl peroxide compounds containing charge-balancing alkali cations, here we show that nanoscale cage clusters containing as many as 60 uranyl ions, bonded through peroxide and hydroxide bridges,...

Simultaneous optimisation of design and operating parameters of MSF desalination process is considered here using MINLP technique within gPROMS software. For a fixed fresh water demand throughout the year and with seasonal variation of seawater temperature, the external heat input (a measure of operating cost) to the process is minimised. It is observed that seasonal variation in seawater tempe...

Dip-coated polystyrene layers of sub-micrometre thickness (85-500nm) have been applied on copper and copper alloys (aluminium brass, copper-nickel 70/30), as well as on stainless steel 304, and produced an effective barrier against corrosion and adhesion of corrosion-relevant microorganisms. According to the dynamic wettability measurements, the coatings exhibited high advancing (103°), recedin...

The critical role of manganese sulphide (MnS) inclusions for the initiation of the short-term growth of pitting or localized corrosion of low carbon steels has long been recognized. Classical results show that pitting probability and pitting severity increases with increased sulphide concentration for low carbon steels as a result of magnesium sulphides acting as local cathodes for initiating p...