OBJECTIVES This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. METHODS The resin composites evaluated in this study include CeramX, Filtek Supreme XT,...

Wood liquefaction using an organic solvent and an acid catalyst has long been studied as a novel technique to utilize biomass as an alternative to petroleum-based products. Oxalic acid is a weaker organic acid than a mineral acid and wood liquefaction with oxalic acid as a catalyst will result in a higher amount of wood residue than that with a mineral acid. Yet the wood residue can be used as ...

This study compared the volumetric shrinkage (VS), flexural strength (FS) and flexural modulus (FM) properties of the low-shrinkage resin composite Aelite LS (Bisco) to those of Filtek LS (3M ESPE) and two regular dimethacrylate-based resin composites, the microfilled Heliomolar (Ivoclar Vivadent) and the microhybrid Aelite Universal (Bisco). The composites (n = 5) were placed on the Teflon ped...

The purpose of this study was to evaluate the influence of power density on contraction stress of resin composite restorative materials during photo-polymerization. Six flowable resin composites, and a hybrid resin composite for comparison, were used. The composites were polymerized with the power density adjusted to either 100 or 600 mW/cm(2). Stress development was determined with a custom-ma...

Low cost composite materials are widely used in civil and structural engineering applications. This project uses EPON to plasticize a commonly used resin, epoxy resin to lower the cost of the composite and to find out the mechanical and thermal properties of the plasticized epoxy resin to see if it is suitable for the said applications. Three point bending tests were carried out to evaluate the...

BACKGROUND This study aimed to conduct a clinical evaluation of four restorative materials for restoration of dental wedge-shaped defect (WSD) and their impacts on periodontal tissues. MATERIAL AND METHODS A total of 280 maxillary premolars with dental WSD were selected from 106 patients; the patient cases were divided into eight groups according to different combinations of restorative materia...

Polymerization shrinkage of resin composite can compromise the longevity of restorations. To minimize this problem, the monomeric composition of composites have been modified. The objective of this study was to conduct a meta-analysis to assess the clinical behavior of restorations performed with low polymerization shrinkage resin composite in comparison with traditional methacrylates-based res...

Carbon nanofiber (CNF)/resole phenolic resin (Hitco 134A) composites exhibited very large increases of bending storage modulus above the glass transition temperature and had higher glass transition temperatures with increasing CNF weight percentage. Small angle neutron scattering (SANS) from dilute suspensions of surface-oxidized CNF in D2O exhibited a Guinier plateau in the q range examined, i...

The aim of this study was to compare and evaluate the effect of four commercially available mouth rinses on the microhardness and solubility of a newly introduced resin-composite namely Estelite® α with Filtek TM P60. The microhybrid and the supra-nano composites used in this study are Filtek TM P60 and Estelite® α respectively. A total of 108 (N) specimens (54 for each resin composite) were fa...