We describe a fabrication strategy for preparing yttria-stabilized zirconia nanotube (YSZ-NT) arrays embedded in porous alumina membranes by means of template-directed atomic layer deposition (ALD) technique. The individual YSZ-NTs have a high aspect-ratio of well over 120, about ~ 110 nm in diameter, and ~ 14 µm in length. Interfacing the tube arrays with porous Pt was also introduced on the b...

We report a metalization technique for electrically addressing templated vertical single-walled carbon nanotubes (SWNTs) using in situ palladium (Pd) nanowires. SWNTs are synthesized from an embedded catalyst in a modified porous anodic alumina (PAA) template. Pd is electrodeposited into the template to form nanowires that grow from an underlying conductive layer beneath the PAA and extend to t...

this paper investigates hollow and porous alumina nanospheres that were previously synthesized to be used for the dehydration of methanol to dimethyl ether (dme). as hollow nanostructures possess characteristics such as low density and high surface to volume ratio, their catalytic activity between hollow and porous structure is compared. for this purpose, three most important parameters (acidit...

Porous ceramics have attracted researchers due to their high chemical and thermal stability. Among various types of porous ceramics, reticulated both porosity good permeability. These properties are difficult replace with metals polymers. ZTA is used in a variety applications, wealth experimental data has already been collected. However, research reports on zirconia-toughened alumina (ZTA) insu...

This study investigated the influence of porosity on the flexural property of a nanoporous alumina film. When the porosity of the alumina film increased, both bending strength and modulus declined. The results from the bending test revealed that the setting of the film during the bending test had significant influence on the flexural property. Fracture only occurred when the porous side of the ...

Oxide-supported amine materials are widely known to be effective CO2 sorbents under simulated flue-gas and direct-air-capture conditions. Most work has focused on amine species loaded onto porous silica supports, though potential stability advantages may be offered through the use of porous alumina supports. Unlike silica materials, which are comparably inert, porous alumina materials can be tu...

A zeolite NaA (A-type zeolite of ca. 0.4 nm pore size; Linde Type A, LTA) membrane for the dehydration of alcohol was characterized by X-ray diffraction analysis (XRD). Also, the relationship between the X-ray absorption and the EtOH/H2O pervaporation (PV) dehydration performance (water selectivity and permeation flux) of the LTA membrane was first investigated. The LTA membranes used here were...

This paper investigates hollow and porous alumina nanospheres that were previously synthesized to be used for the dehydration of methanol to dimethyl ether (DME). As hollow nanostructures possess characteristics such as low density and high surface to volume ratio, their catalytic activity between hollow and porous structure is compared. For this purpose, three most important parameters (acidit...

formation of a fluorescent-dye layer on the surface of porous alumina, the porous alumina substrate was dipped in an ethanol solution containing 20 wt.-% dendrimer [13] and 4 × 10 M pyrromethene 597 (EXITON) for 1 min and then dried. The thickness of the fluorescent-dye layer was approximately 1 lm. Optically pumped lasing experiments were performed using a frequency doubled Nd:yttrium aluminum...