In the present work, total specific pore volume of inorganic polymers (geopolymers) made from seeded fly ash and rice husk bark ash has been predicted by fuzzy logic. Different specimens, made from a mixture of fly ash and rice husk bark ash in fine and coarse form together with alkali activator made of water glass and NaOH solution, were subjected to porosimetry tests at 7 and 28 days of curin...

Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...

Mesoporous nanostructured γ-Al2O3 powders were synthesized through multi- step precipitation procedures using the pH-swing technique. Structural and morphological characteristics in addition to the thermal behavior of the procured samples were characterized via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared (FT-IR) ...

The combined effect of pore size and pore volume on the equilibrium adsorption capacity and the adsorption kinetics for a series of normal alkanes is determined. The selected adsorbents, activated carbon fibers (ACFs) and air activated phenolic fibers (AAPFs), possess a range of micropore sizes and have been thoroughly characterized in past work. For the normal alkane series, the lower surface ...

We investigated a method for producing granulated boehmite (BE) by using an organic binder and measured its phosphate-ion-adsorption capacity. BE was granulated using polyethylene terephthalate (PET), and its structure was characterized by scanning electron microscopy and X-ray diffraction analyses. The properties of granulated BE such as specific surface area, mean pore diameter, pore volume, ...

Characterization of the pore structure of compacted and sintered parts made from a nickel-base powder was accomplished using the mercury porosimetry method. The theoretical density values for the sintered specimens varied from 56.3 to 96.7% which corresponds to a porosity of 43.7 to 3.3%. A maximum interconnecting median pore diameter of 21 mum resulted from a -80/+200 mesh powder compacted at ...

This paper presents the experimental study of liquefaction potential for sandy soil in Prambanan Area, Yogyakarta, Indonesia, which underwent due to Mw 6.3 Jogja Earthquake on May 27, 2006. Shaking table tests considering variation acceleration and shaking duration were performed investigate sand. The time stages including start liquefaction, pore pressure dissipation, observed. percentage incr...

In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...

A clear understanding of the dependence of mechanical properties of bone remains a task not fully achieved. In order to estimate the mechanical properties in bones for implants, pore cross-section area, calcium content, and apparent density were measured in trabecular bone samples for human implants. Samples of fresh and defatted bone tissue, extracted from one year old bovines, were cut in lon...

three activated carbons are synthesized in a rotary reactor at different activation times. the adsorption isotherms of the samples are measured the pore size distribution of the samples is determined using combined saito and foley method, bjh method. an average potential function has been determined inside the cylindrical pores. the effect of activation time on the pore size distribution sample...