More effective techniques are required to mineralize the increasing number of recalcitrant organic contaminants at low concentrations in the water environment using advanced oxidation process. Though relatively new, photocatalytic ozonation (O3/UV/TiO2) is considered superior to ozonation (O3) and photocatalysis (UV/TiO2), due to synergistic effects and use of immobilized TiO2 photocatalysts is...

conclusions according to the results, cop is an efficient and rapid method for removing of toluene from aqueous solutions. results the analysis of variance (anova) of the toluene degradation by cop/mgo nanoparticles showed f-value of 19.53 for the quadratic model indicating that the prepared model is significant. the predicted result showed that maximum degradation of toluene (~99.99%) could be...

Simultaneous anaerobic and aerobic degradation pathways in two-chamber, tubular microbial fuel cells (MFCs) facilitated pentachlorophenol (PCP) mineralization by a mediator-less biocathode. PCP was degraded at a rate of 0.263 ± 0.05 mg/L-h (51.5 mg/g VSS-h) along with power generation of 2.5 ± 0.03 W/m(3). Operating the biocathode MFC at 50°C improved the PCP degradation rate to 0.523 ± 0.08 mg...

The treatment of paper mill effluent for COD, TOC, total phenols and color removal was investigated using combined activated sludge-ozonation processes and single processes. The combined activated sludge-O3/pH 10 treatment was able to remove around 80% of COD, TOC and color from Kraft E(1) effluent. For the total phenols, the efficiency removal was around 70%. The ozonation post treatment carri...

19 Abstract In this work, the ozonation of emergent contaminants represented by pharmaceuticals (Sulfamethoxazole and Bezafibrate) and surfactants (Quaternary Ammonium Compounds) was studied. Results in terms of target compound degradation and mineralization along with the biodegradability and toxicity assessment of formed intermediates are presented. Moreover, a previous study about the suitab...

-This paper presents the results obtained from oxidation with 03 and O3/H20,_ of a residual water coming from the production of dicofoi and tetradifon pesticides, where chlorobenzenes, DDTs and its metabolites and other organochloride compounds were found. The oxidation processes were carried out using ozone (03) in basic medium (pH 9.4) at low dosage (0--1.5 g O~ g-L initial TOC) and in the pr...

Ozonation (O3) is a widely used advanced oxidation process (AOP) for the treatment of wastewater, while its drawbacks include high energy consumption and poor solubility must be reduced or eliminated. Hence, combined catalytic ozonation with H2O2 S2O82- was employed to degrade mono ethylene glycol (MEG) eliminate ecological risks during gas refinery wastewater. In this study, reduction chemical...

Batch scale activated sludge kinetic studies were undertaken for the treatment of pet food wastewater characterized by oil and grease concentrations of up to 21,500 mg/L, COD and BOD concentrations of 75,000 and 60,000 mg/L, respectively as well as effluent from the batch dissolved air flotation (DAF) system. The conducted kinetics studies showed that Haldane Model fit the substrates and biomas...

Background & Aims of the Study: One of the toxic pollutants in the wastewater of petrochemical industries is Terphetalic acid. In this study, the degradation and mineralization of Terphetalic acid in aqueous environment were studied by Ozonation and O3/ZnO processes in a semi batch reactor. Materials & Methods: This study is an experimental research on a laboratory scale. The st...

In this study, polyhydroxybutyrate (PHB)--a biodegradable plastics material--was produced by activated sludge performing enhanced biological phosphorus removal (EBPR) in batch experiments under anaerobic, aerobic and anaerobic/aerobic conditions. Under anaerobic conditions, the maximum PHB content of the dry biomass was 28.8% by weight, while under aerobic or anaerobic/aerobic conditions, the m...