نتایج جستجو برای: nigdc20 anode
تعداد نتایج: 11223 فیلتر نتایج به سال:
A general X-ray tube has two electrodes, the cathode and the anode, with a high voltage applied between them. Electrons are generated at the cathode. After the electrons are emitted from the cathode they are accelerated by the high voltage toward the anode (positive) electrode. The high speed electrons hitting the anode material then generate invisible radiation i.e. X-rays. The energy spectrum...
PEMFC operation with dead-ended anode has inherent transient behavior: the cell operates between purge cycles that replenish fuel and discharge accumulated gases, such as nitrogen and water vapor, and liquid water. During the operation when the anode exit is shut, gases that cross-over from the cathode accumulate and stratify in the anode channels above the liquid water when the gravity is acti...
A detailed study on the anode structure of solid oxide fuel cell (SOFC) is very crucial in developing high performance power generating devices, given how porous electrodes are known to provide a number of active sites for reaction, consequently accelerate fuel conversion. This present study investigates the feasibility of pore former addition to nickel oxideyttria stabilized zirconia (NiO-YSZ)...
Electrochemical oxidation is a promising technology to treatment of bio-refractory wastewater. Coking wastewater contains high concentration of refractory and toxic compounds and the water quality usually cannot meet the discharge standards after conventional biological treatment processes. This paper initially investigated the electrochemical oxidation using boron-doped diamond (BDD) anode for...
Previous experimental studies have shown that addition of small amounts of oxygen to a hydrocarbon fuel stream can control coking in the anode, while relatively large amounts of oxygen are present in the fuel stream in single-chamber solid oxide fuel cells SOFCs . In order to rationally design an anode for such use, it is important to understand the coupled catalytic oxidation/ reforming chemis...
Electron collection at the anodes of large{area silicon drift detectors was studied with STAR2 prototypes. Results of measurements of anode leakage currents, signal dependence on focusing voltages, anode uniformity, and model simulations are reported. A design of the anode region is presented. The design optimization is discussed.
A fuel cell is an electro-chemical tool capable of converting chemical energy into electricity. High operating temperature of solid oxide fuel cell, between 700oC to 1000oC, causes thermal stress. Thermal stress causes gas escape, structure variability and cease operation of the SOFC before its lifetime.The purpose of the current paper is to present a method that predicts ...
A straw tube chamber is a low-cost version of a proportional counter. These devices consist of a pair of coaxial conducting cylinders with the region between the cylinders filled with a gas such as argon. The inner cylinder of radius a is the anode, and is held at potential V ; the outer cylinder of radius b is the cathode, and is grounded. If a penetrating charged particle passes through the c...
Using flawless components are important for a proper material selection and best working conditions to achieve the best performance of solid oxide fuel cells (SOFCs). Tape casting is the most used process for the fabrication of SOFC parts, especially anode and electrolyte due to its advantages regarding the other processes. In this study, the effect of slurry composition and milling time were s...
A hypothesis of the beam auto–focusing in the relativistic vacuum diode with a needle anode is proposed. A physical model of the effect is elaborated. As is shown, auto –focusing of high current beam can be caused by ions emitting from the anode. Initial (pre focusing) stage of focusing is provided with ionization of the gas molecules absorbed in the anode surface. Then (at quasi–steady stage),...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید