in the present study, the effects of growth defects and chromium content loss on the degradation of corrosion andpassivation of cathodic arc evaporation (cae-pvd) of stainless steel coating were investigated in 2 m sulphuricacid solution. eds analysis indicated that the micro-particles were obtained during the coating growth. in addition,it was detected that the growth defects had poor adhesion...

objective: a clinical challenge of using zirconia frameworks is to achieve adequate bond with different substrates. this study aimed to evaluate the effect of bioglass and silica coating of zirconia substrates on microshear bond strength of resin cement to tetragonal zirconia. methods: this laboratory experimental study was conducted on zirconia discs. a total of 120 ytzp zirconia (zirkonzahn) ...

The aim of this study was to deyelop a noyel hydroxyapatite (HA) coating method on zirconia using glass coating technique. A borosi)icate glass, the mixture of the glass ttnd HA (3e, 50, 70, and 90 mass%), and the 100% HA were coated on two kinds of zirconia discs and fired at 900-950'C. After the final coating, the surface of the sample was etched for 3 min in an acid-mixture of 3% HF and 5%HN...

in this research controlled coating of magnetite (fe3o4) nanoparticles with sio2 was investigated. the fe3o4 nanoparticles were synthesized via chemical co-precipitation and then coated by silica according to stober method. effects of tetra ethyl ortho silicate (teos) concentration and ethanol to teos on the coating thickness were investigated. x-ray powder diffraction, fourier transform infrar...

A nanostructural hydroxyapatite (HA) coating was deposited to the porous Ti6Al4V acetabular cup implants using a room temperature electrophoretic deposition (EPD) process in order to achieve the improved bonding strength between the implants and cells, fast healing, good corrosion resistance and long-term stability after implantation. The micropores created in the coating will improve the bioac...

Viscous heating becomes significant in the high speed resin coating process of glass fibers for optical fiber manufacturing. This study focuses on the coating resin flows inside the capillary coating die of optical fiber coating applicator and they are numerically simulated to examine the effects of viscous heating and subsequent temperature increase in coating resin. Resin flows are driven by ...

In this study, an attempt was made to improve the packing density of calcium phosphate (CaP) coating on a magnesium alloy by tailoring the coating solution for enhanced degradation resistance of the alloy for implant applications. An organic solvent, ethanol, was added to the coating solution to decrease the conductivity of the coating solution so that hydrogen bubble formation/bursting reduces...

in this research, tribological characteristics of ni-p electroless coating and double-layered ni-p/ni-b electroless coating were studied. for this purpose, ni-p electroless coating with 25 μm thickness was initially applied to the surface of steel ck45 samples; then, a double-layered ni-p/ni-b electroless coating, including inner layer of ni-p with 15 μm thickness and outer layer of ni-b with 1...

Biomimetic calcium phosphate (CaP) coating has been used successfully for protein delivery, but the release of protein from CaP coating is mainly dependent on the limited dissolution of the CaP coating and the passive diffusion of the protein in the CaP coating. In the present work, our aim is to improve the release behavior of protein from CaP coating and make it more controllable. By using bo...