Sonochemical preparation of Co and Ni promoted MoS(2) supported on alumina was achieved by high-intensity ultrasonic irradiation of isodurene solutions containing molybdenum carbonyl, dicobalt octacarbonyl, elemental sulfur, and Al(2)O(3) or Ni-Al(2)O(3) under Ar flow. The sonochemically prepared catalysts were characterized by elemental analysis, XPS, SEM, TEM, and XEDS, and hydrodesulfurizati...

We performed in-situ transmission electron microscopy (TEM) on a dealloyed nanoporous NiCo catalyst used for the dry reforming of methane (DRM) to investigate the origin of the catalytic activity and structural durability. The in-situ observations and local chemical analysis indicated that the DRM induced chemical demixing of Ni and Co accompanied by grain refinement, implying possible “synergi...

Mesoporous alumina catalysts that incorporate nickel (Ni-Alumina) with different Ni/Al molar ratios of 1:2, 1:5 and 1:10 were synthesized by a one-step sol–gel method using lauric acid as a template. The prepared Ni-Alumina catalysts showed a relatively high surface area with a narrow pore size distribution after calcination at 700 ◦C; these effects were independent of the Ni/Al molar ratio. Al...

We demonstrate electric power generation via the electrooxidation of ethylene glycol (EG) on a series of Fe-group nanoalloy (NA) catalysts in alkaline media. A series of Fe-group binary NA catalysts supported on carbon (FeCo/C, FeNi/C, and CoNi/C) and monometallic analogues (Fe/C, Co/C, and Ni/C) were synthesized. Catalytic activities and product distributions on the prepared Fe-group NA cataly...

Herein, we report a one-step synthesis method for octahedral Pt-Ni-Co ternary catalysts with tunable compositions and fixed shapes. Impressively, the composition optimized octahedral PtNi0.55Co0.1/C demonstrated a significant improvement in ORR activity compared to those of previously reported Pt-Ni-Co alloy octahedra, showing an outstanding specific activity of 5.05 mA cm-2 and a mass activity...

The catalytic performance of Ni-Al, Mg-Al, and Co-Ni LDHs as novel nanocatalysts was evaluated in the oxidation of toluene. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The XRD and FTIR approved the structure and functional groups of the LDH, respectively. Also, the presence of cations with dif...

A theoretical investigation at the DFT(B3LYP) level on the carbonylation reaction of allyl bromide catalyzed by nickel tetra-carbonyl Ni(CO)(4) is discussed. The computational results show the following: (i) Three main steps characterize the catalytic cycle: (a) an oxidative addition step, (b) a carbonylation step, and (c) a reductive elimination step where the acyl product is obtained and the ...

A co-impregnation method was applied to the Ni/Zr-HMS/HZSM-5 catalyst (with various amounts of zirconium) during the hydrogenation of benzene. The physicochemical properties of the prepared nickel catalyst were characterized using X - ray diffraction, X - ray fluorescence, Fourier transform infrared spectroscopy, ultraviolet-visible diffuse reflectance spectroscopy, temperature-programmed desor...

The effect of modifying additive (La2О3) on the activity Ni-Co oxides was studied for dry reforming methane (DRM). catalysts were prepared by impregnation granulated diatomite (D) and characterized SEM, EDX, H2-TPR, XRD, AES. It is shown that addition 1.5 wt.% La2O3 into Ni-Co/D composition leads to an increase in catalyst, providing a conversion close under thermodynamic equilibrium conditions...

Large scale synthesis of carbon nanofibres (CNFs) on a sodium chloride support has been achieved. CNFs have been synthesized using metal oxalate (Ni, Co and Fe) as catalyst precursors at 680 C by chemical vapour deposition method. Upon pyrolysis, this catalyst precursors yield catalyst nanoparticles directly. The sodium chloride was used as a catalyst support, ...