Composite specimens were prepared by dispersion of various amounts of nano-sized Al2O3 fillers in a monomer system containing 60% Bis-GMA and 40% TEGDMA. For comparative purposes, composite samples containing micrometer size Al2O3 fillers were also prepared following the same procedure. The mechanical properties of the lightcured samples were assessed by three-point flexural strength, diametral...

The main aim of this paper was to determine the amount of Al2O3 reinforcement that results into best combination of strength. Magnesium nano composites containing 3.5, 7.0 and 14 volume percentage of Al2O3 were synthesized through powder metallurgy route. Resistance of furnace sintering technique (heating rate: 49°C/min).Micro structural characterization revealed reasonably uniform distribution...

One-dimensional γ-Al2O3 nanofibers were modified with Nb2O5 to be used as an efficient heterogeneous catalyst to catalyze biomass into 5-hydroxymethylfurfural (5-HMF). At low Nb2O5 loading, the niobia species were well dispersed on γ-Al2O3 nanofiber through Nb-O-Al bridge bonds. The interaction between Nb2O5 precursor and γ-Al2O3 nanofiber results in the niobia species with strong Lewis acid si...

Disperse fine equiaxed α-Al2O3 nanoparticles with narrow size distribution are important materials in nanotechnology and nanomaterials, but syntheses of disperse fine equiaxed α-Al2O3 nanoparticles usually result in fine γ-Al2O3 nanoparticles or large α-Al2O3 nanoparticles larger than 15 nm. α-Al2O3 has a higher surface energy than γ-Al2O3 and becomes thermodynamically not stable with respect t...

wettability alteration is one of the most important methods for oil recovery from sandstone andcarbonate reservoirs. the effects of salinity, ph, temperature, and chemicals such as surfactants andfatty acids on the alteration of the wettability were described in previous studies. in recent years,attention has been directed to nanoparticles as a wettability alteration agent. the effect of somena...

The entrance of Cd (II) to aqueous environments causes a major problem to human health. The current article examines the efficiency of TiO2 and γ-Al2O3 nanoparticles in Cd (II) removal from aqueous medium as influenced by different chemical factors, such as pH, initial concentration, background electrolyte, and ionic strength, in accordance with standard experimental methods. It conducts Batch ...

Rapid urbanization and requirement of infrastructure, stable construction sites are not available. Therefore, there is a dire need for improvement marginal soils to be used as material. However, weak comprise saturated clays, fine silts, loose sand, which susceptible failure pose problems stability. this research aims study the strength microstructural behavior soft treated with nano-alumina (A...

In present work a experimental study based on thermosyphon is investigated using a solid nano-particles added to water as a working fluid. Tests are made on a thermosyphon. The experiment was performed in order to measure the temperature distribution and compare the heat transfer rate of the thermosyphon with the nano uid and with pure water. The tested concentration level of the nano-particles...

Belite cement was prepared using nano-silicas extracted from three different agricultural wastes – black rice husk ash (BRHA), bagasse (BA), and palm oil fuel (POFA) which were reacted at 1200 − 1400 °C with CaC2 residue as calcium source. The product compared that CaCO3. Nano-silica BRHA of very fine particle size (surface area 312.4 m2/g V/S ratio 0.35 × 106 cm) being highly reactive, forms β...

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...