A so called all-carbon based graphene field effect transistor (GFET) in which the electrodes are composed of graphite-like nano-sheets instead of metals in the traditional devices is fabricated by one-step e-beam direct writing (EBDW). It is also found that the graphite-like nano-sheets in electrodes are perpendicular to the channel graphene, which is confirmed by the transmission electron micr...

Presented is the material and gas sensing properties of graphene-like nano-sheets deposited on 36° YX lithium tantalate (LiTaO3) surface acoustic wave (SAW) transducers. The graphene-like nano-sheets were characterized via scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The graphenelike nano-sheet/SAW sensors were exposed to differen...

Semiconductor nanowires (NWs) or nanobelts (NBs) have attracted more and more attention due to their potential application in novel optoelectronic devices. In this review, we present our recent work on novel NB photodetectors, where a three-terminal metal-semiconductor field-effect transistor (MESFET) device structure was exploited. In contrast to the common two-terminal NB (NW) photodetectors,...

High-performance and cost-effective rechargeable batteries are key to the success of electric vehicles and large-scale energy storage systems. Extensive research has focused on the development of (i) new high-energy electrodes that can store more lithium or (ii) high-power nano-structured electrodes hybridized with carbonaceous materials. However, the current status of lithium batteries based o...

We report a robust and direct route to fabricate a three-dimensional nano-foam of few-layer graphene (3D-NFG) with large area coverage via a chemical vapor deposition (CVD) technique. Pyrolysis of polymer/nickel precursor film under a hydrogen environment, simply prepared by spin-coating, leads to the creation of nano-foam in the film and the reduction process of nickel ions. Carbonized-C and t...

the aim of this study was to investigate the removal of toluene from air through nano-graphene modified by ionic liquid (ng-il). the batch adsorption experiments in glass bottle of gas chromatography equipped with flame ionization detector (gc-fid) were used. graphene ultrahigh-quality synthesized by substrate-free gas-phase method in a single step and graphene sheets were deposited with ionic-...

Despite recent progress in nano-optomechanics, active control of optical fields at the nanoscale has not been achieved with an on-chip nano-electromechanical system (NEMS) thus far. Here we present a new type of hybrid system, consisting of an on-chip graphene NEMS suspended a few tens of nanometres above nitrogen-vacancy centres (NVCs), which are stable single-photon emitters embedded in nanod...

To investigate the effects of nano-graphene oxide on the number of kupffer cells and megakaryocytes, in vivo method was applied. In this study, four groups of livers including control, sham, experimental group 1 (using a dose of 17 mg/kg), experimental group 2 (using a dose of 5.5 mg/kg), were investigated. On day 9 of gestation, control group without the effect of graphene oxide, sham group wi...

The small size of Na(+) and Cl(-) ions provides a bottleneck in desalination and is a challenge in providing alternatives for continuously depleting fresh water resources. Graphene by virtue of its structural properties has the potential to address this issue. Studies have indicated that use of monolayer graphene can be used to filter micro volumes of saline solution. Unfortunately it is extrem...

Graphene oxide was synthesized by using modified Hummers method and also Graphene-NiO nanocomposite prepared by hydrothermal method with the use of graphene oxide solution, Ni(NO3)2•6H2O and urea as raw materials. The synthesized nanocomposite was characterized by the XRD, Raman, SEM, TGA and energy dispersive spectrometer analysis. The results demonstrate that NiO nano particles uniformly cove...