The adsorptive capability of superheated steam activated biochar (SSAB) produced from Colocasia esculenta was investigated for removal of Cu(2+), Fe(2+) and As(5+) from simulated coal mine wastewater. SSAB was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analyser. Adsorption isotherm indicated monolayer adsorption which fitted...

− One among factors responsible of the instability of mass standard is the adsorption and desorption induced by the cleaning products. An optical non-contact method based on mirage effect is proposed to investigate the adsorption/desorption of cleaning solvents on the surface of mass standards at conditions close to normal temperature and pressure (NTP). A model developed for the mirage effect ...

The effect of isotherm parameters of a displacer on the efficiency of desorption Chromatography has been investigated numerically. A general nonlinear multicomponent rate equation model with Langmuir isotherm was used in this study. It was found that the best displacer in this kind of operation is usually not the one that is more strongly adsorbed than the adsorbates when the operation is to di...

The effect of acid treatment on the adsorptive capacity a Brazilian palygorskite to remove crystal violet (CV) and congo red (CR) dyes was investigated. raw acid-treated by different HCl solutions (2, 4, 6 mol/L). modifications structure were investigated using X-ray diffraction, fluorescence, Fourier-transform infrared spectroscopy, N2 adsorption/desorption, thermogravimetric differential ther...

A sulfhydryl-lignocellulose/montmorillonite (SLT) nanocomposite was prepared using a chemical intercalation reaction. The SLT nanocomposite was characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Transmission Electron Microscopy (TEM), the results demonstrated that an intercalated-exfoliated nanostructure was formed i...

Chromium is abundant in nature and has a dominant presence in most of the effluent streams as compared to other heavy metal ions. The presence of highly toxic and carcinogenic hexavalent chromium (Cr(VI)) in effluent streams is a major environmental issue. The electroplating and tannery industry effluents are the major source for the Cr(VI) production in wastewater streams. The present work dea...

In this research, the adsorption capacity of diatomaceous earth in removal crystal violet dye (CV) aqueous solution was evaluated. The experimental methodology began with determination texture properties by adsorption-desorption isotherms N2 a 77 K, identification functional groups Fourier transform infrared spectrophotometry (FTIR), morphology scanning electron microscopy (SEM) and, pH isoelec...

The aim of this work is to evaluate the adsorption performances of activated carbon derived from sewage sludge (ACSS) for gaseous formaldehyde removal compared with three commercial activated carbons (CACs) using self-designing adsorption and distillation system. Formaldehyde desorption of the activated carbons for regeneration was also studied using thermogravimetric (TG) analysis. The porous ...

A new and inexpensive lignocellulose/montmorillonite (LNC/MMT) nanocomposite was prepared by a chemical intercalation of LNC into MMT and was subsequently investigated as an adsorbent in batch systems for the adsorption-desorption of Ni(II) ions in an aqueous solution. The optimum conditions for the Ni(II) ion adsorption capacity of the LNC/MMT nanocomposite were studied in detail by varying pa...

We have studied adsorption in regular, self-ordered alumina pores open at both ends or only at one end. The straight, non-connected pores have diameters ranging from 22 to 83 nm, with a relative dispersion below 1% in the pore size. Adsorption isotherms measured in open pores with a torsional microbalance show pronounced hysteresis loops characterized by nearly vertical and parallel adsorption ...