In this paper the rectangular microstrip patch antenna arrays has been designed for S, C and X-band application by using the IE3D simulator. Roger RT/duroid material with dielectric constant 2.2 and height 1.588 has been used as a substrate material. Microstrip inset line feed has been used for feeding the rectangular patch antenna. Here 1x2 and 1x4 patch antenna array has been designed using s...

In this paper a novel structure of metamaterial is proposed in order to miniaturize a rectangular microstrip patch antenna. The metamaterial is composed of two nested split octagons which are located on a 10 mmx10 mm Rogers RT/duroid 5880 with 0.7874 mm thickness and dielectric constant of 2.2. A 3X5 array of such metamaterials is placed on the patch antenna substrate. By using this metamateria...

This paper presents a 1×4 array antenna using asymmetric T-shaped slit loaded microstrip antenna (MSA). The antenna consists of four MSAs align vertically on a dielectric substrate and ground plane. This antenna will be utilized in WLAN applications as the commercial panel antenna. A modified array configuration is proposed to further enhance the antenna radiation characteristics and usable ban...

This paper presents a low-cost compact planar microstrip-fed monopole antenna and its four-element array design for ultra-wideband (UWB) wireless communication and target detection applications, respectively, operating in the frequency span of 3 GHz to 11 GHz. A prototype was fabricated and then measured based on optimal parameters. The results of reflection coefficient (S11) and radiation patt...

In this paper, a radial line microstrip antenna array (RL-MSAA) for linear polarization is designed. Stacked microstrip antennas (MSAs) with a stub element in the upper parasitic element are arrayed on a radial waveguide as a phase-controllable radiation element. A prototype array with three concentric rows of the stacked MSAs is tested in 12 GHz.

This paper presents design and fabrication equilateral triangular parasitic patch microstrip antenna array with operating frequency at 2.42 GHz, for wireless communication systems. The Industry, Scientific and Medical (ISM) Band, unlicensed with the range 2.40 2.4835 GHz is used as the operation band. The maximum bandwidth can be achieved by controlling the distance between the patch antennas a...

In this paper, we present multiple L slots antenna for WIMAX and WLAN applications. wideband microstrip patch antenna for wireless applications. The coplanar waveguide fed microstrip patch antenna comprises of four rectangular patch array each embedded on three L slots and a Plus slot either on the patch or on the ground plane or on both the patch and the ground plane. The design results in red...

In this paper, a four-element microstrip antenna array is presented. The array is composed of Wilkinson power dividers which act as feed network along with Dolph-Chebyshev distribution and fouridentical patch antenna elements. The array elements are properly designed to have a compact size and constant gain against frequency. The simulated results show good agreement with the measured results f...

The work undertaken is the proposal and simulation of a reconfigurable microstrip antenna array for adaptive base station operating in the UMTS frequency band. Our array antenna is performed with Fr4 (Er = 4.5 tgδ = 0.02 h = 1.6mm). The basic antenna array is constituted of circular patches adapted with coplanar notches and circular patches parasite fed by electromagnetic coupling. The system a...

Many kinds of microstrip array antennas have been developed in the millimeter-wave band. In order to avoid feeding loss and the decrease of antenna gain by beam shift due to frequency changes, center-fed array antennas are advantageous. In this case, the element spacing around the feeding circuit of the transition from the waveguide to two microstrip lines is larger than one wavelength. Therefo...