In this study, adsorption measurement of various chlorinated hydrocarbons on Y-type zeolites were performed using the chromatographic method to examine the adsorption phenomena. Dichloromethane (DCM), chloroform (TCM), trichloroethylene (TCE), and tetrachloroethylene (PCE), were used as the chlorinated hydrocarbons, and PQ-USY, USY-6.18, Na-Y, HSZ-390HUD, Pentasile-2 and Pentacil-1 were used as...

The ability of 12 commercially available cardiotomy reservoirs to remove bubbles from aspirated blood was investigated by means of a simulated cardiopulmonary bypass circuit and an ultrasonic microbubble detector. Performance varied considerably. The number of gaseous microemboli remaining after passage of blood through the reservoir was reduced by (a) holding the blood in the reservoir, (b) re...

Abstract: Chromatographic measurements were made for the adsorption of benzene, toluene and m-xylene on molecular sieving carbon (MSC) in a supercritical fluid CO2 mixed with organics. A supercritical chromatograph packed with MSC was used to detect pulse responses of the organics. Adsorption equilibria and adsorption dynamic parameters for organics were obtained by moment analysis of the respo...

The combined effect of pore size and pore volume on the equilibrium adsorption capacity and the adsorption kinetics for a series of normal alkanes is determined. The selected adsorbents, activated carbon fibers (ACFs) and air activated phenolic fibers (AAPFs), possess a range of micropore sizes and have been thoroughly characterized in past work. For the normal alkane series, the lower surface ...

Conducting p-type polymer layers on n-type Si have been widely studied for the fabrication of cost-effective hybrid solar cells. In this work, time-of-flight secondary ion mass spectrometry (TOF-SIMS) is used to provide three-dimensional chemical imaging of the interface between poly(3,4-ethylene-dioxythiophene):polystyrenesulfonate (PEDOT:PSS) and SiOx/Si in a hybrid solar cell. To minimize st...

The decomposition of dolomite into CaO and MgO was performed at 1073 K in vacuum and at 1273 K in an Ar atmosphere. The dolomite calcined in vacuum was found to have a higher specific surface area and a higher micropore volume when compared to the dolomite calcined in the Ar atmosphere. These pyrolysis products of dolomite were reacted with CO2 at 673 K for 21.6 ks. On the absorption of CO2, th...

In order to examine the relationships between micropore radius and adsorption efficiency , removal of Total Particulate Matter (TPM), tar, water and semivolatiles in cigarette smoke by five kinds of activated carbon fibers (ACF) with micropore radii from 8 to 16 A was measured. An ACF having wider micropores reduced TPM and tar effectively but, the water reduction was in opposition to this tend...

Activated carbons are disorganized materials with variable pore size distributions (PSD). If one assumes that the porosity consists mainly of locally slit-shaped micropores, model isotherms can be obtained by computer simulations and used to assess the PSD on the basis of experimental isotherms. In the present study, CO isotherms have been measured at 273 K on 2 seven well-characterized micropo...

Abstract A micropore-filtration method was used to reduce the proportion of plant DNA in microbial samples isolated from roots prior sequencing. We tested impact this pre-sequencing filtration methodology and it characterize root microbiome maize grown on two soils with different fertility levels. The micropore reduced contamination unveiled potential N-poor soil for N fixation phosphate uptake...

A facile approach to fabricate novel highly microporous carbons has been developed by direct carbonization of lowly cross-linked polystyrene. The as-prepared highly microporous carbons demonstrate unusually high micropore rate (97%), high surface area (1108 m(2) g(-1)) and uniform pore size distribution, and thus exhibit excellent size-selective adsorption and electrochemical properties.